Use the best ways of preparing for 350-501 Exam Dumps with BootcampPDF Cisco 350-501 dump PDF [2021]
Cisco 350-501 exam candidates will surely pass the Exam if they consider the 350-501 dumps learning material presented by BootcampPDF.
NEW QUESTION 19
Drag and drop the LDP features from the left onto the correct usages on the right.
Answer:
Explanation:
NEW QUESTION 20
Refer to the exhibit:
A network engineer is implementing a BGP protocol. Which effect of the locat-as keyword in this configuration is true?
- A. It enables peer 192.168.1.2 to establish a BGP relationship with R1 using AS 65112 and the VPNv4 address family
- B. It enables peer 192.168.1.2 to establish a BGP relationship with R1 using AS 65012 and the VPNv4 address family
- C. It enables peer 192.168.1.2 to establish a BGP relationship with R1 using AS 65112 without additional configuration.
- D. It enables peer 192.168.1.2 to establish a BGP relationship with R1 using AS 65012 without additional configuration
Answer: C
NEW QUESTION 21
Refer to the exhibit.
While troubleshooting the network, a network operator with an employee id: 3812:12:993 is trying to ping XR1. Which result should the operator expect when trying to ping to an XR1 local address?
- A. All ICMP traffic is dropped.
- B. All ICMP traffic responds successfully.
- C. ICMP traffic works at a policed rate of 19 bytes per second every 100 ms
- D. ICMP traffic works at a policed rate of 19 packets every 100 ms.
Answer: B
NEW QUESTION 22
Refer to the exhibit:
BGPsec is implemented on R1. R2. R3. and R4 BGP peering is established between neighboring autonomous systems Which statement about implementation is true?
- A. BGP updates from the eBGP peers are appended with an additional AS path value that is statically set by the domain administrator
- B. BGP updates from the all BGP peers are appended with a community of no export
- C. BGP updates from the eBGP peers are appended with a BGPsec attribute sequence that includes a public key hash and digital signature
- D. BGP updates from the iBGP peers are appended with a community of local-as
Answer: C
NEW QUESTION 23
Refer to the exhibit:
Based on the show/ command output, which result m true after BGP session is established?
- A. The IOS XR router advertises and accepts all routes to and from eBGP neighbor 192.168.2.2
- B. No routes are accepted from the neighbor 192.168.2.2, nor are any routes advertised to it
- C. The IOS XR router does not advertise any routes to the neighbor 192.168.2.2,but it accepts all routes from 192.168.2.2.
- D. The IOS XR router advertises all routes to the neighbor 192.168.2.2, but it does not accept any routes from 192.168.2.2
Answer: B
NEW QUESTION 24
Refer to the exhibit:
This configuration is being applied on an IOS XR router.
Which statement about this configuration is true?
- A. It is used to identify traps for SNMP polling
- B. It is used to create a subscription to specify the streaming interval
- C. It is used to create a sensor-group and has a list of YANG models for streaming
- D. It is used to identify MIB entries and has a list of YANG models
Answer: C
NEW QUESTION 25
Refer to the exhibit:
Which statement about the status of the neighbor relationship between R1 and R2 is true?
- A. The neighbor relationship is down because the two routers are configured with different area types
- B. The neighbor relationship is down because the two routers are in the same subnet.
- C. The neighbor relationship is up because R2 is level 1 and level 2 router.
- D. The neighbor relationship is down because R2 is operating as a Level 1 router and the two routers are in different area
Answer: B
NEW QUESTION 26
An engineer is implementing IGMP with SSM on a multicampus network that supports video streaming. Which task must the engineer perform as part of the process?
- A. Configure the network to use bidirectional PIM.
- B. Configure an RP that uses static assignments only.
- C. Configure the network to use the PIM bsr-candidate
- D. Configure the network to use IGMPv3.
Answer: D
NEW QUESTION 27
Refer to the exhibit.
Router 1 is missing the route for the router 2 loopback 0. What should the engineer change to fix the problem?
- A. the hello timers on Router 1 and Router 2 to be different
- B. the area numbers on Router 1 and Router 2 to be similar
- C. the wildcard mask network statement in OSPF of Router 2
- D. Router 1 to be an ABR
Answer: B
NEW QUESTION 28 
Refer to the exhibit. What is the effect of this configuration applied on the IOS XR router?
- A. It is used to set up configuration to poll network data
- B. It is used to enable gRPC
- C. It is used to create a streaming subscription with a 600-second interval
- D. It is used to create a streaming subscription with a 60-second interval
Answer: D
Explanation:
Section: Automation and Assurance
Explanation/Reference:
NEW QUESTION 29
Refer to the exhibit:
Which purpose of implementing NSF with this configuration is true?
- A. The router uses NSF to handle RP switchover while allowing neighbor relationships to remain up
- B. The router uses NSF to load balance traffic on a routed EtherChannel
- C. The router uses NSF to reduce neighbor-relationship downtime during RP switchover
- D. The router uses NSF to load balance traffic between two links, with the primary link alternating every 90 seconds
Answer: A
NEW QUESTION 30
Refer to the exhibit:
Export statistics received do not include the BGP next hop.
Which statement about the NetFlow export statistics is true?
- A. The origin AS and the peer-as will be included in the export statistics
- B. Loopback 0 must be participating in BGP for it to be included in the export statistics
- C. To include the BGP next hop in the export statistics, those keywords must be included with the version
9 entry. - D. Only the origin AS of the source router will be included in the export statistics.
Answer: A
NEW QUESTION 31
Refer to the exhibit:
Based on the show/ command output, which result m true after BGP session is established?
- A. The IOS XR router advertises and accepts all routes to and from eBGP neighbor 192.168.2.2
- B. No routes are accepted from the neighbor 192.168.2.2, nor are any routes advertised to it
- C. The IOS XR router does not advertise any routes to the neighbor 192.168.2.2,but it accepts all routes from 192.168.2.2.
- D. The IOS XR router advertises all routes to the neighbor 192.168.2.2, but it does not accept any routes from 192.168.2.2
Answer: B
NEW QUESTION 32
Which statement about TLS is accurate when using RESTCONF to write configurations on network devices'?
- A. It requires certificates for authentication.
- B. It is used for HTTP and HTTPS requests.
- C. It is provided using NGINX acting as a proxy web server
- D. It is not supported on Cisco devices
Answer: A
NEW QUESTION 33
Refer to the exhibit:
Router R1 and its peer R2 reside on the same subnet in the network, If does it make connections to R27
- A. R1 establishes UDP connections that are authenticated with a clear-text password
- B. R1 establishes UDP connections that are authenticated with an MD5 password
- C. R1 establishes TCP connections that are authenticated with a clear-text password
- D. R1 establishes TCP connections that are authenticated with an MD5 password
Answer: D
NEW QUESTION 34
Refer to the exhibit:
Based on the show/ command output, which result m true after BGP session is established?
- A. The IOS XR router advertises and accepts all routes to and from eBGP neighbor 192.168.2.2
- B. The IOS XR router does not advertise any routes to the neighbor 192.168.2.2,but it accepts all routes from 192.168.2.2.
- C. The IOS XR router advertises all routes to the neighbor 192.168.2.2, but it does not accept any routes from 192.168.2.2
- D. No routes are accepted from the neighbor 192.168.2.2, nor are any routes advertised to it
Answer: A
NEW QUESTION 35 
Refer to the exhibit. After implementing a new design for the network, a technician reviews the pictures CLI output as part of the MOP.
Which two elements describe what the technician can ascertain from the ImpNull output? (Choose two.)
- A. Label 0 is used for the prefix displayed and will be part of the MPLS label stack for packets destined for
192.168.10.10. - B. Penultimate Hop Popping is in use for the prefix displayed.
- C. Label 0 is used for the prefix displayed, but will not be part of the MPLS label stack for packets destined for
192.168.10.10. - D. Ultimate Hop Popping is in use for the prefix displayed.
- E. Label 3 is in use for the prefix displayed and will be part of the MPLS label stack for packets destined for
192.168.10.10.
Answer: A,B
Explanation:
Section: MPLS and Segment Routing
NEW QUESTION 36
Refer to the exhibit:
It the NetFlow configuration is updated to version 9, which additional piece of information can be reported"?
- A. flow sequence numbers
- B. BGP AS information
- C. IPv6 flow information
- D. IPv4 flow information
Answer: C
NEW QUESTION 37
DRAG DROP
Drag and drop the functions from the left onto the correct Path Computation Element Protocol roles on the right.
Select and Place:
Answer:
Explanation:
Section: Services
NEW QUESTION 38 
Refer to the exhibit. What is the URL used for with REST API?
- A. It is used to initiate an FTP session to save a running configuration of a device.
- B. It is used to send a TACACS + authentication request to a server.
- C. It is used to contact a URL filter to determine the efficacy of a web address.
- D. It is used to send a message to the APIC to perform an operation on a managed object or class operator.
Answer: D
Explanation:
Section: Automation and Assurance
NEW QUESTION 39
A network engineer has configured TE tunnels in the MPLS provider core. Which two steps ensure traffic traverse? (Choose two.)
- A. A tunnel weight is configured in SPF database the same way as a native link.
- B. ECMP between tunnels allows RSVP to function correctly.
- C. Static routes is the only option for directing traffic into a tunnel.
- D. Forwarding adjacency features allows a tunnel to be installed in the IGP table as a link.
- E. The IGP metric of a tunnel is configured to prefer a certain path
Answer: D,E
NEW QUESTION 40
Refer to the exhibit:
Which command is used to complete this configuration for QoS class-based marking?
- A. PE-A(config-pmap-c)#fair-queue
- B. PE-A(config-pmap-c)#set dscp ef
- C. PE-A(config-pmap-c)#random-detect
- D. PE-A(config -pmap-c)#priority
Answer: B
NEW QUESTION 41
Refer to the exhibit.
What is the effect of this configuration?
- A. R1 supports a peer that is configured for LDP SSO/NSF as the peer recovers from an outage.
- B. R1 failovers to any peer.
- C. R1 failovers only to a peer that is configured for LDP SSO/NSF.
- D. R1 supports a graceful restart operation on the peer, even if graceful restart is disabled on the peer.
Answer: C
NEW QUESTION 42
......
Full 350-501 Practice Test and 250 unique questions with explanations waiting just for you, get it now: https://drive.google.com/open?id=1wdSEs89AuveXD29gmv0G855QbV9-4T-4
Accurate & Verified Answers As Seen in the Real Exam here: https://www.bootcamppdf.com/350-501_exam-dumps.html