[Nov-2023 Newly Released] NS0-183 Dumps for NetApp NCSIE ONTAP Certified
Updated Verified NS0-183 dumps Q&As - 100% Pass
The NS0-183 certification exam is intended for professionals who are responsible for the installation, configuration, and support of NetApp data storage solutions. This includes storage engineers, system administrators, and IT professionals who work with NetApp products and technologies. Candidates for this certification should have a solid understanding of storage architecture and data management principles, as well as experience with NetApp products and solutions.
NEW QUESTION # 14
Which type of partitioning would you use when installing a FAS8200 with 24 SAS drives running ONTAP 9.5?
- A. root-root-data partitioning
- B. root-data-data partitioning
- C. root-root-data-data partitioning
- D. root-data partitioning
Answer: D
NEW QUESTION # 15
You want to verify that connections are cables correctly and that shelf IDs are unique within an HA pair.
Which tool would be used to accomplish these tasks?
- A. System Diagnostics
- B. Active IQ Config Advisor
- C. Active IQ Unified Manager
- D. Cloud Insights
Answer: A
NEW QUESTION # 16
After a storage failover, you notice that a NAS LIF, that is linked to the broadcast domain CIFS, is no longer reachable after the takeover. Node cluster1-01 is still waiting for giveback.
Referring to the exhibit, what caused the problem?
- A. Port a0a of node cluster1-01 is down.
- B. The LIF has to be configured with a failover group.
- C. The broadcast-domain MTU needs to be either 1500 or 9000.
- D. The ports of cluster1-02 are missing in the broadcast domain.
Answer: C
NEW QUESTION # 17
Click the Exhibit button.
You want to add a FAS2750 HA pair to an existing 6-node cluster.
Referring to the exhibit, which action would you perform to begin adding the node?
- A. Use the exit or quit commands then run the cluster setup command.
- B. Reboot the node and enter maintenance mode and run the Cluster Setup wizard.
- C. Use the node setup wizard and select 0a as the management interface.
- D. Use the back command to begin the Cluster Setup wizard.
Answer: C
NEW QUESTION # 18
Which hot-swappable transceiver is required to obtain full performance from a Cisco Nexus 3232C cluster-interconnect switch?
- A. SFP
- B. QSFP28
- C. SFP+
- D. QSFP+
Answer: B
NEW QUESTION # 19
You completed an ONTAP cluster deployment as a reseller engineer. During the knowledge transfer process to the customer, they ask for proof that the array has correct multi-path HA cabling deployed and that the array is error free.
Which documentation output would you present to the customer to satisfy this requirement?
- A. NetAppDocs output
- B. Active IQ Unified Manager output
- C. Active IQ OneCollect output
- D. Config Advisor output
Answer: D
Explanation:
Explanation/Reference: https://docs.netapp.com/platstor/topic/com.netapp.doc.hw-controller-add/GUID-64A51339-
1F03-451C-B062-9F97E772817E.html
NEW QUESTION # 20
What are two ways to identify an AFF All SAN Array system? (Choose two.)
- A. View the ONTAP System Manager cluster settings.
- B. View the ONTAP System Manager system nodes.
- C. Use the cluster image show CLI command.
- D. Use the san config show CLI command.
Answer: B,D
Explanation:
Explanation
Ways to identify an ASA system You can identify an ASA system using ONTAP System Manager or using the ONTAP command line interface (CLI). From the ONTAP System Manager dashboard, you can click on the system nodes. The personality type is displayed as "ASA" for ASA systems. From the CLI, you can use san config show command. The ASA value returns as true for ASA systems
NEW QUESTION # 21
You are a NetApp Professional Services engineer, employed by NetApp. You have just completed an ONTAP cluster installation. You need to collect the relevant configuration information to enable the Service Event Report (SER) to be created.
Which tool would you use to accomplish this task?
- A. Active IQ scheduled reports
- B. ONTAP System Manager
- C. Active IQ Config Advisor worksheet
- D. NetAppDocs output report
Answer: B
Explanation:
https://library.netapp.com/ecmdocs/ECMP1307349/html/GUID-08047CFA-4D59-4E35-B232-1B5FDBBBE0F0.html
NEW QUESTION # 22
Which two SVMs are automatically created during the cluster setup? (Choose two.)
- A. data SVM
- B. admin SVM
- C. node SVM
- D. system SVM
Answer: B,D
Explanation:
https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.dot-cm-sag%2FGUID-D860985F-11BF-4589-9457-E0FD03130B1F.html
NEW QUESTION # 23
You create a LIF called svm_cifs_lif01 on a port that is already in an up state. After you test the storage failover, the LIF does not automatically revert to its home port.
In this scenario, what should you do to solve the problem?
- A. Add the port in a broadcast domain.
- B. Configure a new failover group.
- C. Configure the LIF with the automatic revert option.
- D. Configure the LIF with the DHCP option.
Answer: C
NEW QUESTION # 24
Your customer wants to buy four new DS212C shelves with an 8 TB SATA drive. The customer also wants to know the usable aggregate size of this configuration.
In this scenario, which resource would you use to accomplish this task?
- A. Hardware Universe (HWU)
- B. Config Advisor
- C. Interoperability Matrix Tool (IMT)
- D. Fusion
Answer: D
NEW QUESTION # 25
Click the Exhibit button.
Referring to the exhibit, what information is forwarded to syslog after you enter the scripted install commands? (Choose two.)
- A. AutoSupport messages
- B. EMS messages
- C. SNMP traps
- D. command history
Answer: B,D
NEW QUESTION # 26
You are performing an automated upgrade of a 2-node cluster. Node-01 upgrades successfully. But during the node-02 upgrade, there is a power outage at the site. When power is restored and the nodes are booted, you receive this message: Warning: The Cluster is in a mixed version state. Update all of the nodes to the same version as soon as possible.
In this scenario, which command provides information that will help you understand the problem?
- A. system node upgrade show-task-status
- B. system node image package show
- C. system node image show
- D. system node upgrade-revert show
Answer: D
NEW QUESTION # 27
Click the Exhibit button.
Referring to the exhibit, what information is forwarded to syslog after you enter the scripted install commands? (Choose two.)
- A. SNMP traps
- B. EMS messages
- C. AutoSupport messages
- D. command history
Answer: C,D
Explanation:
Explanation/Reference: https://www.netapp.com/media/10674-tr4569.pdf
NEW QUESTION # 28
After you deploy a 4-node AFF A220, you want to upgrade the ONTAP version of the cluster.
In this scenario, before the upgrade, which advanced CLI command is used to locate epsilon?
- A. cluster ha show
- B. cluster show
- C. clustering ring show
- D. cluster image show
Answer: B
NEW QUESTION # 29
You are a NetApp Professional Services engineer, employed by NetApp. You have just completed an ONTAP cluster installation. You need to collect the relevant configuration information to enable the Service Event Report (SER) to be created.
Which tool would you use to accomplish this task?
- A. ONTAP System Manager
- B. Active IQ scheduled reports
- C. Active IQ Config Advisor worksheet
- D. NetAppDocs output report
Answer: B
NEW QUESTION # 30
After a storage failover, you notice that a NAS LIF, that is linked to the broadcast domain CIFS, is no longer reachable after the takeover. Node cluster1-01 is still waiting for giveback.
Referring to the exhibit, what caused the problem?
- A. Port a0a of node cluster1-01 is down.
- B. The LIF has to be configured with a failover group.
- C. The broadcast-domain MTU needs to be either 1500 or 9000.
- D. The ports of cluster1-02 are missing in the broadcast domain.
Answer: C
NEW QUESTION # 31
You are installing a new 2-node AFF A220 cluster running ONTAP 9.5. The customer would like to use the UTA2 adapters from the first controller to connect to the 10GbE front-end switches. On the second controller, they would like to use the first UTA2 port as a target FC port, and the second as an FC initiator. In this scenario, according to NetApp Best practices, what should your customer do?
- A. Change the first two ports of each controller to FC and the last two to CNA.
- B. Change all the UTA2 ports from CNA mode to FC mode.
- C. Change all the UTA2 ports to CNA to support both FC and Ethernet.
- D. Change the UTA2 ports from CNA mode to FC mode on the first controller.
Answer: A
NEW QUESTION # 32
You are planning to install a new ONTAP 9.7 All SAN Array (ASA) into your existing data center.
In this scenario, which cluster configuration is allowed with ASA controllers?
- A. Add the ASA controllers to an existing 10-node cluster.
- B. Add the ASA controllers to an existing 4-node cluster with NAS licenses.
- C. ASA controllers can only be added to clusters that have existing SAN licenses.
- D. ASA controllers can only be installed as a standalone HA pair.
Answer: C
NEW QUESTION # 33
You are setting up a new AFF A400 that will serve iSCSI LUNs. You will have four iSCSI SVMs that each need to connect to an Internet Storage Name Service (iSNS) for discovery and management purposes.
In this scenario, which network interface is needed for each SVM to register with the name service?
- A. SVM data LIF
- B. node management LIF
- C. SVM management LIF
- D. intercluster LIF
Answer: D
NEW QUESTION # 34
Click the Exhibit button.
A customer has a 2-node FAS8200 cluster with four DS212C shelves with 10 TB SATA drives.
Referring to the exhibit, an aggregate will be created with which default RAID type?
- A. RAID_TEC
- B. RAID4
- C. RAID1
- D. RAID_DP
Answer: A
NEW QUESTION # 35
Before installing an 8-node cluster for a customer, you want to validate compatibility with existing hardware.
Which two tools would you use to validate the configuration? (Choose two.)
- A. Interoperability Matrix Tool
- B. Hardware Universe
- C. Active IQ Config Advisor
- D. Active IQ System Manager
Answer: A,C
NEW QUESTION # 36
You are preparing for the installation of a new 2-node cluster with ONTAP 9.7 using NL-SAS drives. Your customer wants to use the cluster exclusively with FlexGroups.
In this scenario, which two statements are correct? (Choose two.)
- A. A NAS protocol is licensed on both nodes.
- B. All NL-SAS drives are assigned only to one of the nodes.
- C. A SAN protocol is licensed on both nodes.
- D. All NL-SAS drives are divided evenly across both nodes.
Answer: A,D
NEW QUESTION # 37
While troubleshooting an issue with a newly installed system, you used the system controller environment show command.
In this scenario, which issue would be diagnosed with this command?
- A. shelf cabling issues
- B. controller version issues
- C. controller hardware issues
- D. controller configuration issues
Answer: C
NEW QUESTION # 38
You are installing a new ONTAP 9.7 cluster and attaching the cluster to two separate networks. Your customer has indicated that the same range of client IP addresses are used on both networks and that the networks are never allowed to communicate with each other.
In this scenario, which ONTAP feature must be configured to securely allow all clients to access ONTAP NAS protocols?
- A. BGP
- B. IPspaces
- C. broadcast domains
- D. routing
Answer: B
Explanation:
https://www.netapp.com/media/16885-tr-4182.pdf 9.3 Multiple IPspaces with Overlapping IP Addresses
NEW QUESTION # 39
......
Latest NS0-183 Exam Dumps Network Appliance Exam from Training: https://www.bootcamppdf.com/NS0-183_exam-dumps.html