[Nov-2022] Cisco 300-430 Official Cert Guide PDF
Exam 300-430: Implementing Cisco Enterprise Wireless Networks - BootcampPDF
Introduction to Cisco 300-430: Implementing Cisco Enterprise Wireless Networks Exam
It is a 90-minute test affiliated with the CCNP Service Provider and Cisco Accredited Professional-wireless networks Implementation certifications. Cisco 300-430: Implementing Cisco Enterprise Wireless Networks exam tests the candidate's knowledge of different aspects of wireless networks and their core concepts, from the service provider. Different types of 310-430 practice test helps the students to prepare for the exam.
NEW QUESTION 71
Refer to the exhibit.
An engineer must connect a fork lift via a WGB to a wireless network and must authenticate the WGB certificate against the RADIUS server. Which three steps are required for this configuration? (Choose three.)
- A. Configure WLAN to authenticate using ISE.
- B. Configure a policy on ISE to allow devices to connect that validate the certificate.
- C. Configure the access point with the root certificate from ISE.
- D. Configure WGB as a network device in ISE.
- E. Configure the certificate on the WLC.
- F. Configure the certificate, WLAN, and radio interface on WGB.
Answer: A,B,F
NEW QUESTION 72
Which configured is applied to prevent the network from a Layer 2 flooding of multicast frames with a seamless transfer of multicast data to the client when roaming from one controller to another?
- A. Enable IGMPv3 on the central Layer 3 switch.
- B. Create multicast groups on the central Layer 3 switch.
- C. Enable IGMP snooping on the WLC
- D. Enable multicast mode on the WLC
Answer: C
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-4/configuration/guides/consolidated/b_cg74_CONS
NEW QUESTION 73
When implementing self-registration for guest/BYOD devices, what happens when an employee tries to connect four devices to the network at the same time?
- A. Purge time dictates how long a device is registered to the portal.
- B. The registration is allowed, but only one device is connected at any given time.
- C. The last device is removed and the newly added device is updated as active device.
- D. All devices are allowed on the network simultaneously.
Answer: B
Explanation:
https://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Borderless_Networks/Unified_Access/BYOD_Design_Guide/BYOD_Enhanced_Use_Case.html
NEW QUESTION 74
Refer to the exhibit.
The image shows a packet capture that was taken at the CLI of the Cisco CMX server. It shows UDP traffic from the WLC coming into the server. What does the capture prove?
- A. The Cisco CMX server receives Angle-of-Arrival data from the WLC.
- B. The Cisco CMX server receives NetFlow data from the WLC.
- C. The Cisco CMX server receives SNMP traffic from the WLC.
- D. The Cisco CMX server receives NMSP traffic from the WLC.
Answer: A
Explanation:
Explanation
https://www.cisco.com/c/en/us/support/docs/wireless/connected-mobile-experiences/200907-configuring-and-tro
NEW QUESTION 75
An engineer must implement Cisco Identity-Based Networking Services at a remote site using ISE to dynamically assign groups of users to specific IP subnets. If the subnet assigned to a client is available at the remote site, then traffic must be offloaded locally, and subnets are unavailable at the remote site must be tunneled back to the WLC. Which feature meets these requirements?
- A. learn client IP address
- B. FlexConnect local authentication
- C. central DHCP processing
- D. VLAN-based central switching
Answer: D
NEW QUESTION 76
A company is collecting the requirements for an on-premises event. During the event, a wireless client connected to a dedicated WLAN will run a video application that will need to average 300000000 bits per second to function properly. What is the QoS marketing that needs to be applied to that WLAN?
- A. Silver
- B. Gold
- C. Platinum
- D. Bronze
Answer: B
NEW QUESTION 77
Where is Cisco Hyperlocation enabled on a Cisco Catalyst 9800 Series Wireless Controller web interface?
- A. Flex Profile
- B. AP Join Profile
- C. Policy Profile
- D. RF Profile
Answer: B
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/config-guide/b_wl_16_10_cg/cisco-hyperlocatio
NEW QUESTION 78
Refer to the exhibit.
An engineer is creating an ACL to restrict some traffic to the WLC CPU. Which selection must be made from the direction drop-down list?
- A. It must be Inbound because traffic goes to the WLC.
- B. To have the complete list of options, the CPU ACL must be created only by the CLI.
- C. Packet direction has no significance; it is always Any.
- D. It must be Outbound because it is traffic that is generated from the WLC.
Answer: A
NEW QUESTION 79
A corporation is spread across different countries and uses MPLS to connect the offices. The senior management wants to utilize the wireless network for all the employees. To ensure strong connectivity and minimize delays, an engineer needs to control the amount of traffic that is traversing between the APs and the central WLC. Which configuration should be used to accomplish this goal?
- A. FlexConnect mode with central authentication
- B. FlexConnect mode with local authentication
- C. FlexConnect mode with OfficeExtend enabled
- D. FlexConned mode with central switching enabled
Answer: C
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/wireless/controller/72/configuration/guide/cg/cg_flexconnect.html#wp12
NEW QUESTION 80
A company has a single WLAN configured for 802.1x authentication with the QoS set to Silver. This WLAN supports all corporate and BYOD access. A decision has been made to allow users to install Cisco Jabber on their personal mobile devices. Users report poor voice quality when using Jabber. QoS is being applied only as best effort. What must be configured to ensure that the WLAN remains on the Silver class and to ensure Platinum class for Jabber?
- A. Configure QoS on the mobile devices that have Jabber installed.
- B. Enable Cisco Centralized Key Management on the WLAN so that the Jabber-enabled devices will connect.
- C. Configure the WLAN to broadcast on 5 GHz radios only and allow Jabber users to conned.
- D. Configure an AVC profile for the Jabber traffic and apply it to the WLAN.
Answer: D
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/81/Jabber_in_WLAN/b_Jabber_in_WLAN.html#reference_7B4539C91FBE4639ACF906F6F3931667
NEW QUESTION 81
Which three properties are used for client profiling of wireless clients? (Choose three.)
- A. OS version
- B. DHCP
- C. hostname
- D. HTTP user agent
- E. MAC OUI
- F. IP address
Answer: B,D,E
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/7-5/NativeProfiling75.html
NEW QUESTION 82
An IT team is growing quickly and needs a solution for management device access. The solution must authenticate users from an external repository instead of the current local on the WLC, and it must also identify the user and determine what level of access users should have. Which protocol do you recommend to achieve these goals?
- A. TACACS+
- B. RADIUS
- C. network policy server
- D. LDAP
Answer: A
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/switches/lan/Denali_161/ConfigExamples_Technotes/Techzone_Articles
https://community.cisco.com/t5/wireless-mobility-documents/wlc-and-acs-5-x-tacacs-configuration-example-we
NEW QUESTION 83
A corporation has recently implemented a BYOD policy at their HQ. Which two risks should the security director be concerned about? (Choose two.)
- A. malware
- B. lost and stolen devices
- C. keyloggers
- D. network analyzers
- E. unauthorized users
Answer: A,B
Explanation:
Explanation
https://ccbtechnology.com/byod-5-biggest-security-risks/
https://blogs.cisco.com/security/byod-many-call-it-bring-your-own-malware-byom
NEW QUESTION 84
A customer wants to allow employees to easily onboard their personal devices to the wireless network. The visitors also must be able to connect to the same network without the need to engage with anyone from the reception desk. Which process must be configured on Cisco ISE to support this requirement?
- A. MAC authentication bypass
- B. self-registration guest portal
- C. native supplicant provisioning
- D. local web auth
Answer: B
Explanation:
Explanation
https://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/216330-ise-self-registered-guest-p
NEW QUESTION 85
Refer to the exhibit.
A customer has implemented Cisco FlexConnect deployments with different WLANs around the global and is opening a new branch in a different location. The engineers' task is to execute all the wireless configuration and to suggest how to configure the switch ports for new Aps. Which configuration must the switching team use on the switch ports?
- A. Multiple VLAN
- B. Access mode
- C. Single mode
- D. Trunk mode
Answer: B
NEW QUESTION 86
Which two statements about the requirements for a Cisco Hyperlocation deployment are true? (Choose two.)
- A. The Cisco Hyperlocation feature must be enabled only on the wireless LAN controller.
- B. After enabling Cisco Hyperlocation on Cisco CMX, the APs and the wireless LAN controller must be restarted.
- C. The Cisco Hyperlocation feature must be enabled on the wireless LAN controller and Cisco CMX.
- D. NTP can be configured, but that is not recommended.
- E. If the Cisco CMX server is a VM, a high-end VM is needed for Cisco Hyperlocation deployments.
Answer: C,E
Explanation:
Explanation
https://www.cisco.com/c/en/us/products/collateral/wireless/mobility-services-engine/datasheet-c78-734648.html
NEW QUESTION 87
During the EAP process and specifically related to the client authentication session, which encrypted key is sent from the RADIUS server to the access point?
- A. WPA key
- B. session key
- C. shared-secret key
- D. encryption key
Answer: B
Explanation:
NEW QUESTION 88
What is an important consideration when implementing a dual SSID design for BYOD?
- A. After using the provisioning SSID, an ACL that used to make the client switch SSIDs forces the user to associate and traverse the network by MAC filtering.
- B. If multiple WLCs are used, the WLAN IDs must be exact for the clients to be provisioned and traverse the network correctly.
- C. SSIDs for this setup must be configured with NAC State-RADIUS NAC for the clients to authenticate with Cisco ISE, or with NAC State-ISE NAC for Cisco ISE to associate the client.
- D. One SSID is for provisioning and the other SSID is for gaining access to the network. The use of an ACL should not be enforced to make the client connect to the REAL SSID after provisioning.
Answer: D
Explanation:
NEW QUESTION 89
An engineer needs to configure an autonomous AP for 802.Ix authentication. To achieve the highest security an authentication server is used for user authentication During testing, the AP fails to pass the user authentication request to the authentication server. Which two details need to be configured on the AP to allow communicator! between the server and the AP? (Choose two.)
- A. Shared secret
- B. RADIUS IP address
- C. Username and password
- D. PAC encryption key
- E. Group name
Answer: B,C
NEW QUESTION 90
Which three properties are used for client profiling of wireless clients? (Choose three.)
- A. OS version
- B. DHCP
- C. hostname
- D. HTTP user agent
- E. MAC OUI
- F. IP address
Answer: B,D,E
Explanation:
NEW QUESTION 91
A network engineer has been hired to perform a new MSE implementation on an existing network. The MSE must be installed in a different network than the Cisco WLC. Which configuration allows the devices to communicate over NMSP?
- A. Allow TCP/16666 port on the router.
- B. Allow UDP/16113portonthe central switch.
- C. Allow TCP/16113 port on the firewall.
- D. Allow UDP/16666 port on the VPN router.
Answer: C
Explanation:
Explanation
https://www.cisco.com/en/US/docs/wireless/mse/3350/6.0/CAS/configuration/guide/msecg_ch4_CAS.html
NEW QUESTION 92
For security purposes, an engineer enables CPU ACL and chooses an ACL on the Security > Access Control Lists > CPU Access Control Lists menu. Which kind of traffic does this change apply to, as soon as the change is made?
- A. wired traffic only
- B. wireless traffic only
- C. wireless and wired traffic
- D. VPN traffic
Answer: B
NEW QUESTION 93
Which component must be integrated with Cisco DNA Center to display the location of a client that is experiencing connectivity issues?
- A. Wireless Intrusion Prevention System
- B. Cisco Hyperlocation Module
- C. Cisco Mobility Services Engine
- D. Cisco Connected Mobile Experiences
Answer: D
NEW QUESTION 94
......
Location Services
This exam part focuses on 10% of the overall content and requires that the candidates possess the ability to perform the following tasks:
- Implementing the location services, including clients, rogue APs, client tracking, interferers, and RFID tags.
- Deploying CMX & MSE on the wireless networks;
Free 300-430 Exam Dumps to Improve Exam Score: https://www.bootcamppdf.com/300-430_exam-dumps.html
2022 Realistic 300-430 Dumps Exam Tips Test Pdf Exam Materials: https://drive.google.com/open?id=1VRU1po9oeNSR76oblSUWq8EhbNXjLY6F