Free 300-430 Sample Questions and 100% Cover Real Exam Questions (Updated 281 Questions)
Download Real Cisco 300-430 Exam Dumps Test Engine Exam Questions
Cisco 300-430 exam tests an individual's knowledge and skills in various areas related to enterprise wireless networks. These include wireless site surveys, wireless infrastructure implementation, wireless network design, and wireless security implementation. 300-430 exam also covers advanced topics such as location services, mobility, and network optimization.
Monitoring
This domain makes up about 15% of the whole content and evaluates the individuals’ understanding of the following processes:
- Managing RF interferers;
- Troubleshooting the client’s connectivity.
- Utilizing reports on Cisco DNA Center and PI;
- Managing rogues and alarms;
NEW QUESTION # 133
Which type of information should be included in an installation report?
- A. A complete characterization of the external WLAN environment.
- B. A detailed description of the WLAN environment during the post-installation testing, for example, number of people present, furniture, no furniture, and sources of interference present.
- C. The exact number of users the WLAN will support.
- D. Soft copies of configuration for switches, routers, controllers, and location appliances.
Answer: D
NEW QUESTION # 134
An engineer is designing a high availability wireless network. What mechanism should be the focus for high availability?
- A. RSSI
- B. SNR
- C. channel reuse
- D. cell overlap
Answer: D
NEW QUESTION # 135
An engineer has implemented 802.1x authentication on the wireless network utilizing the internal database of a RADIUS server. Some clients reported that they are unable to connect. After troubleshooting, it is found that PEAP authentication is failing. A debug showed the server is sending an Access-Reject message. Which action must be taken to resolve authentication?
- A. Disable the server certificate to be validated on the client.
- B. Use the user password that is configured on the server.
- C. Update the client certificate to match the user account.
- D. Replace the client certificates from the CA with the server certificate.
Answer: A
Explanation:
https://www.cisco.com/en/US/docs/security/ise/1.0/user_guide/ise10_troubleshooting.html
NEW QUESTION # 136
Refer to the exhibit.
Which two items must be supported on the VoWLAN phones to take full advantage of this WLAN configuration? (Choose two.)
- A. APSD
- B. 802.11e
- C. TSPEC
- D. SIFS
- E. WMM
Answer: B,E
NEW QUESTION # 137
Refer to the exhibit. An engineer must connect a fork lift via a WGB to a wireless network and must authenticate the WGB certificate against the RADIUS server. Which three steps are required for this configuration? (Choose three.)
- A. Configure the certificate, WLAN, and radio interface on WGB.
- B. Configure a policy on ISE to allow devices to connect that validate the certificate.
- C. Configure the certificate on the WLC.
- D. Configure WGB as a network device in ISE.
- E. Configure the access point with the root certificate from ISE.
- F. Configure WLAN to authenticate using ISE.
Answer: A,B,F
NEW QUESTION # 138
A company has a single WLAN configured for 802.1x authentication with the QoS set to Silver. This WLAN supports all corporate and BYOD access. A decision has been made to allow users to install Cisco Jabber on their personal mobile devices. Users report poor voice quality when using Jabber. QoS is being applied only as best effort. What must be configured to ensure that the WLAN remains on the Silver class and to ensure Platinum class for Jabber?
- A. Configure QoS on the mobile devices that have Jabber installed.
- B. Configure an AVC profile for the Jabber traffic and apply it to the WLAN.
- C. Enable Cisco Centralized Key Management on the WLAN so that the Jabber-enabled devices will connect.
- D. Configure the WLAN to broadcast on 5 GHz radios only and allow Jabber users to conned.
Answer: B
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/81/Jabber_in_WLAN/b_Jabber_in_WLAN.
NEW QUESTION # 139
An engineer is integrating a new Cisco Mobility Services Engine with Cisco Prime Infrastructure to use Cisco CMX Location Analytics. Which action is required?
- A. Set history parameters in Cisco Mobility Service Engine
- B. Enable tracking parameters in Cisco Mobility Service Engine
- C. Install Cisco Prime infrastructure with floor maps
- D. Enable Context Aware and CMX Browser Engage
Answer: B
NEW QUESTION # 140
ALLAR A network engineer must segregate all iPads on the guest WLAN to a separate VLAN. How does the engineer accomplish this task without using Cisco ISE?
- A. Create a local policy on the WLC.
- B. Use 802.1x authentication to profile the devices
- C. Enable RADIUS DHCP profiling on the WLAN.
- D. Use an mDNS profile for the iPad device.
Answer: A
NEW QUESTION # 141
Refer to the exhibit.
An engineer has deployed the Cisco CMX solution to track and detect the number of users who visit the office each day. The CMX dashboard is not showing any dat a. Which action resolves this issue?
- A. Configure Single Sign-On authentication.
- B. Copy the exported Maps from CMX server to PI using SCP.
- C. Install an evaluation license to CMX server.
- D. Add the WLCs to CMX.
Answer: D
NEW QUESTION # 142
Refer to the exhibit.
An engineer must connect a fork lift via a WGB to a wireless network and must authenticate the WGB certificate against the RADIUS server. Which three steps are required for this configuration? (Choose three.)
- A. Configure the certificate, WLAN, and radio interface on WGB.
- B. Configure a policy on ISE to allow devices to connect that validate the certificate.
- C. Configure the certificate on the WLC.
- D. Configure WGB as a network device in ISE.
- E. Configure the access point with the root certificate from ISE.
- F. Configure WLAN to authenticate using ISE.
Answer: A,B,F
Explanation:
https://mrncciew.com/2018/05/25/wgb-with-peap/
NEW QUESTION # 143
Refer to the exhibit. An administrator notices slower location updates from the controller to Cisco CMX. Which command must be configured to get an update every 5 seconds for rogues?
- A. config cmx notification interval rssi rogues 5
- B. config location notification interval rssi rogues 5
- C. config nmsp notification interval rssi rogues 5
- D. config subscription notification interval rssi rogues 5
Answer: C
NEW QUESTION # 144
When configuring a Cisco WLC, which CLI command adds a VLAN with VLAN ID of 30 to a FlexConnect group named BranchA-FCG?
- A. config flexconnect BranchA-FCG vlan add 30
- B. config flexconnect group BranchA-FCG vlan add 30
- C. config flexconnect BranchA-FCG vlan 30 add
- D. config flexconnect group BranchA-FCG vlan 30 add
Answer: B
Explanation:
NEW QUESTION # 145
A company has a single WLAN configured for 802.1x authentication with the QoS set to Silver. This WLAN supports all corporate and BYOD access. A decision has been made to allow users to install Cisco Jabber on their personal mobile devices. Users report poor voice quality when using Jabber. QoS is being applied only as best effort. What must be configured to ensure that the WLAN remains on the Silver class and to ensure Platinum class for Jabber?
- A. Configure QoS on the mobile devices that have Jabber installed.
- B. Configure an AVC profile for the Jabber traffic and apply it to the WLAN.
- C. Enable Cisco Centralized Key Management on the WLAN so that the Jabber-enabled devices will connect.
- D. Configure the WLAN to broadcast on 5 GHz radios only and allow Jabber users to conned.
Answer: B
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/81/Jabber_in_WLAN/b_Jabber_in_WLAN.html#reference_7B4539C91FBE4639ACF906F6F3931667
NEW QUESTION # 146
What is the default NMSP echo interval between Cisco MSE and a Wireless LAN Controller?
- A. 15 seconds
- B. 60 seconds
- C. 10 seconds
- D. 30 seconds
Answer: A
NEW QUESTION # 147
Refer to the exhibit.
An engineer tries to manage the rogues on the Cisco WLC. Based on the configuration, which AP is marked as malicious by the controller?
- A. rogue AP with SSlD admin seen for 4000 seconds and heard at -70 dBm
- B. rogue AP with SSlD admin seen for 4000 seconds and heard at -60 dBm
- C. rogue AP with SSID admin seen for 3000 seconds and heard at -70 dBm
- D. rogue AP with SSID admin seen for 3000 seconds and heard at -60 dBm
Answer: C
Explanation:
NEW QUESTION # 148
Which three properties are used for client profiling of wireless clients? (Choose three.)
- A. hostname
- B. MAC OUI
- C. DHCP
- D. OS version
- E. IP address
- F. HTTP user agent
Answer: B,C,F
Explanation:
NEW QUESTION # 149
A network administrator managing a Cisco Catalyst 9800 WLC must place all iOS connected devices to the guest SSID on VLAN 101. The rest of the clients must connect on VLAN 102 distribute load across subnets. To achieve this configuration, the administrator configures a local policy on the WLC. Which two configurations are required? (Choose two.)
- A. Enable device classification on global wireless settings.
- B. Allow HTTP and DHCP profiling under policy map.
- C. Create a service template.
- D. Assign a policy map under global security policy settings.
- E. Add local profiling policy under global security policy settings.
Answer: A,C
NEW QUESTION # 150
......
Cisco 300-430 exam is a certification designed for professionals who want to validate their knowledge and skills in implementing Cisco enterprise wireless networks. 300-430 exam is designed to assess the candidate's ability to configure, troubleshoot, and optimize enterprise wireless infrastructure. Implementing Cisco Enterprise Wireless Networks certification is ideal for network administrators, wireless network engineers, and network architects who specialize in wireless networking.
New 300-430 exam dumps Use Updated Cisco Exam: https://www.bootcamppdf.com/300-430_exam-dumps.html
Verified 300-430 Dumps Q&As - 300-430 Test Engine with Correct Answers: https://drive.google.com/open?id=1GyVYTwNUNr2hZM6AEDxx0A0oD6TG9emB