[Feb-2024] 156-315.81 Certification with Actual Questions from BootcampPDF
Updated 156-315.81 Dumps PDF - 156-315.81 Real Valid Brain Dumps With 616 Questions!
The Check Point Certified Security Expert R81 certification exam, also known as CheckPoint 156-315.81, is designed to test the knowledge and skills of IT professionals in the field of network security. Check Point Certified Security Expert R81 certification is ideal for individuals who want to demonstrate their expertise in deploying, managing, and troubleshooting Check Point Security solutions. 156-315.81 exam is based on the latest Check Point R81 software release, which includes advanced features such as unified policy management, cloud-based security, and threat intelligence.
NEW QUESTION # 225
What is the valid range for Virtual Router Identifier (VRID) value in a Virtual Routing Redundancy Protocol (VRRP) configuration?
- A. 1-255
- B. 0 - 255
- C. 0-254
- D. 1-254
Answer: A
NEW QUESTION # 226
You have used the "set inactivity-timeout 120" command to prevent the session to be disconnected after 10 minutes of inactivity. However, the Web session is being disconnected after 10 minutes. Why?
- A. The number of minutes is correct. Probably, you have forgotten to save this setting with the "save config" command.
- B. Probably, you have forgotten to make sure that nobody is accessing the management server via the SmartConsole which locks the management database.
- C. The number specified is the amount of the idle timeout in seconds rather than in minutes. So you have to use the command "set inactivity-timeout 600" instead.
- D. The idle timeout for the web session is specified with the "set web session-timeout" command.
Answer: B
NEW QUESTION # 227
What are the services used for Cluster Synchronization?
- A. 256H-CP tor Full Sync and 8116/UDP for Delta Sync
- B. TCP/256 for Full Sync and Delta Sync
- C. 8116/UDP for Full Sync and Delta Sync
- D. No service needed when using Broadcast Mode
Answer: A
Explanation:
Explanation
https://sc1.checkpoint.com/documents/R81/WebAdminGuides/EN/CP_R81_ClusterXL_AdminGuide/Topics-CX
NEW QUESTION # 228
Fill in the blank: __________ information is included in "Full Log" tracking option, but is not included in
"Log" tracking option?
- A. Data type
- B. Application
- C. Destination port
- D. File attributes
Answer: A
Explanation:
Explanation
The Full Log tracking option includes more information than the Log tracking option, such as the data type of the traffic. The data type indicates the type of content that was transferred, such as text, image, video, or audio.
The data type can be used for filtering and reporting purposes. The Log tracking option only includes basic information, such as source, destination, service, action, and time.
NEW QUESTION # 229
Which features are only supported with R81.10 Gateways but not R77.x?
- A. Access Control policy unifies the Firewall, Application Control & URL Filtering, Data Awareness, and Mobile Access Software Blade policies.
- B. The rule base can be built of layers, each containing a set of the security rules. Layers are inspected in the order in which they are defined, allowing control over the rule base flow and which security functionalities take precedence.
- C. Time object to a rule to make the rule active only during specified times.
- D. Limits the upload and download throughput for streaming media in the company to 1 Gbps.
Answer: B
NEW QUESTION # 230
Using AD Query, the security gateway connections to the Active Directory Domain Controllers using what protocol?
- A. Remote Desktop Protocol (RDP)
- B. Hypertext Transfer Protocol Secure (HTTPS)
- C. Lightweight Directory Access Protocol (LDAP)
- D. Windows Management Instrumentation (WMI)
Answer: D
NEW QUESTION # 231
How many layers make up the TCP/IP model?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
Explanation:
Explanation
The TCP/IP model is a four-layer model that describes how data is transmitted over a network. The four layers are: Application, Transport, Internet, and Network Access. The Application layer provides services and protocols for applications to communicate with each other. The Transport layer provides reliable or unreliable data delivery between hosts. The Internet layer provides routing and addressing of packets across networks.
The Network Access layer provides physical and logical access to the network media. References: Training & Certification | Check Point Software, Check Point Resource Library
NEW QUESTION # 232
How many images are included with Check Point TE appliance in Recommended Mode?
- A. the most new image
- B. as many as licensed for
- C. 2(OS) images
- D. images are chosen by administrator during installation
Answer: C
NEW QUESTION # 233
What API command below creates a new host object with the name "My Host" and IP address of "192 168 0
10"?
- A. create host name "My Host" ip-address "192.168 0.10"
- B. set host name "My Host" ip-address "192.168.0.10"
- C. mgmt.cli -m <mgmt ip> add host name "My Host" ip-address "192.168.0 10"
- D. new host name "My Host" ip-address "192 168.0.10"
Answer: B
NEW QUESTION # 234
What is the minimum number of CPU cores required to enable CoreXL?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
Explanation:
Explanation
CoreXL is a technology that improves the performance of the Security Gateway by utilizing multiple CPU cores for processing traffic. CoreXL creates multiple instances of the firewall kernel (fwk) that run in parallel on different CPU cores. The number of kernel instances can be configured using the cpconfig command on the Security Gateway3. The minimum number of CPU cores required to enable CoreXL is 2, as one core is reserved for SND (Secure Network Distributor) and one core is used for running a kernel instance4. If the Security Gateway has only one CPU core, CoreXL cannot be enabled. Therefore, the correct answer is C.
References: 3: CoreXL Administration Guide 4: [CoreXL Frequently Asked Questions (FAQ)]
NEW QUESTION # 235
To fully enable Dynamic Dispatcher on a Security Gateway:
- A. Using cpconfig, update the Dynamic Dispatcher value to "full" under the CoreXL menu.
- B. run fw multik set_mode 1 in Expert mode and then reboot.
- C. Edit/proc/interrupts to include multik set_mode 1 at the bottom of the file, save, and reboot.
- D. run fw ctl multik set_mode 9 in Expert mode and then Reboot.
Answer: D
NEW QUESTION # 236
Which one is not a valid Package Option In the Web GUI for CPUSE?
- A. Upgrade
- B. Export Package
- C. Database Conversion to R81.10 only
- D. Clean Install
Answer: B
Explanation:
Explanation
CPUSE (Check Point Upgrade Service Engine) is a tool that allows users to download, import, install, and uninstall software packages on Gaia OS. CPUSE has a web-based user interface that can be accessed through Gaia Portal. CPUSE offers four package options in the web GUI for different purposes4:
Clean Install - This option performs a clean installation of a Major Version package, which erases all existing configuration and data on the system.
Export Package - This option exports a package from CPUSE repository to an external location for backup or transfer purposes.
Upgrade - This option performs an upgrade of a Major Version package or a Minor Version package, which preserves the existing configuration and data on the system.
Database Conversion - This option converts the database schema of a Major Version package to match the current version.
Therefore, the correct answer is B.
References: 4: CPUSE - Gaia Deployment Agent
NEW QUESTION # 237
Using mgmt_cli, what is the correct syntax to import a host object called Server_1 from the CLI?
- A. mgmt_cli add host name "Server_1" ip-address "10.15.123.10" --format json
- B. mgmt._cli add object "Server-1" ip-address "10.15.123.10" --format json
- C. mgmt_cli add-host "Server_1" ip_address "10.15.123.10" --format txt
- D. mgmt_cli add object-host "Server_1" ip-address "10.15.123.10" --format json
Answer: A
Explanation:
Example:
mgmt_cli add host name "New Host 1" ip-address "192.0.2.1" --format json
* "--format json" is optional. By default the output is presented in plain text.
NEW QUESTION # 238
SmartConsole R81 requires the following ports to be open for SmartEvent R81 management:
- A. 19190,22
- B. 18190,80
- C. 19090,22
- D. 19009,443
Answer: D
Explanation:
Explanation
To use SmartConsole R81 for managing SmartEvent R81, you need to have the following ports open:
Port 19009 for communication over HTTPS (443)
Port 19009 for communication over HTTP (80)
These ports are necessary for the SmartConsole to communicate with SmartEvent for management and monitoring purposes.
References: Check Point Certified Security Expert R81 documentation and learning resources.
NEW QUESTION # 239
What is the protocol and port used for Health Check and State Synchronization in ClusterXL?
- A. CCP and 8116
- B. CPC and 8116
- C. CCP and 18190
- D. CCP and 257
Answer: A
NEW QUESTION # 240
......
Pass Your 156-315.81 Exam Easily With 100% Exam Passing Guarantee: https://www.bootcamppdf.com/156-315.81_exam-dumps.html
100% Free 156-315.81 Exam Dumps Use Real Check Point Certified Security Expert Dumps: https://drive.google.com/open?id=1VAhE58SjXCyiDnW0_Jio6OjEgSK-3mNd