2023 Realistic 156-315.81 Dumps Questions To Gain Brilliant Result
Start your 156-315.81 Exam Questions Preparation with Updated 564 Questions
The 156-315.81 exam covers a wide range of topics, including network security, threat prevention, VPN technologies, security management, and advanced troubleshooting. 156-315.81 exam is designed to test the candidate's knowledge of the latest security technologies and best practices used in securing enterprise networks. 156-315.81 exam is based on the latest version of Check Point's R81 software, which includes advanced threat prevention capabilities and enhanced security management features.
NEW QUESTION # 121
SmartEvent uses it's event policy to identify events. How can this be customized?
- A. By modifying the firewall rulebase
- B. By matching logs against exclusions
- C. By creating event candidates
- D. By matching logs against event rules
Answer: D
NEW QUESTION # 122
When performing a minimal effort upgrade, what will happen to the network traffic?
- A. All connections that were initiated before the upgrade will be handled by the standby gateway
- B. All connections that were Initiated before the upgrade will be dropped, causing network downtime.
- C. All connections that were initiated before the upgrade will be handled normally
- D. All connections that were initiated before the upgrade will be handled by the active gateway
Answer: D
NEW QUESTION # 123
What is the valid range for VRID value in VRRP configuration?
- A. 1 - 255
- B. 0 - 255
- C. 0 - 254
- D. 1 - 254
Answer: A
Explanation:
Virtual Router ID - Enter a unique ID number for this virtual router. The range of valid values is 1 to 255.
NEW QUESTION # 124
What traffic does the Anti-bot feature block?
- A. Command and Control traffic to servers with reputation for hosting malware
- B. Command and Control traffic from hosts that have been identified as infected
- C. Network traffic that is directed to unknown or malicious servers
- D. Network traffic to hosts that have been identified as infected
Answer: B
NEW QUESTION # 125
After having saved the Clish Configuration with the "save configuration config.txt" command, where can you find the config.txt file?
- A. You will find it in the home directory of your user account (e.g. /home/admin/)
- B. You can locate the file via SmartConsole > Command Line.
- C. You have to launch the WebUI and go to "Config" -> "Export Config File" and specifiy the destination directory of your local file system.
- D. You cannot locate the file in the file system since Clish does not have any access to the bash file system
Answer: A
NEW QUESTION # 126
Which pre-defined Permission Profile should be assigned to an administrator that requires full access to audit all configurations without modifying them?
- A. Super User
- B. Auditor
- C. Full Access
- D. Read Only All
Answer: D
NEW QUESTION # 127
What API command below creates a new host object with the name "My Host" and IP address of "192 168 0 10"?
- A. mgmt.cli -m <mgmt ip> add host name "My Host" ip-address "192.168.0 10"
- B. new host name "My Host" ip-address "192 168.0.10"
- C. create host name "My Host" ip-address "192.168 0.10"
- D. set host name "My Host" ip-address "192.168.0.10"
Answer: D
NEW QUESTION # 128
What are the correct sleps upgrading a HA cluster (Ml is active. M2 is passive) using Multi-Version Cluster(MVC) Upgrade?
- A. 1) In SmartConsole. change the version of the cluster object
2) Upgrade the passive node M2 to R81.10
3) Enable the MVC mechanism on the upgraded R81.10 Cluster Member M2 Wcphaconf mvc on
4) Install the Access Control Policy and make sure that the installation will not stop if installation on one cluster member fails
5) After examine the cluster states upgrade node M1 to R81.10
6) On each Cluster Member, disable the MVC mechanism and Install the Access Control Policy SmartConsole. change the version of the cluster object - B. 1) Enable the MVC mechanism on both cluster members #cphaprob mvc on
2) Upgrade the passive node M2 to R81.10
3) In SmartConsole. change the version of the cluster object
4) Install the Access Control Policy and make sure that the installation will not stop if installation on one cluster member fails
5) After examine the cluster states upgrade node M1 to R81.10
6) On each Cluster Member, disable the MVC mechanism - C. 1) Upgrade the passive node M2 to R81.10
2) Enable the MVC mechanism on the upgraded R81.10 Cluster Member M2 ttcphaconf mvc on
3) In SmartConsole, change the version of the cluster object 4} Install the Access Control Policy
5) After examine the cluster states upgrade node M1 to R81.10
6) On each Cluster Member, disable the MVC mechanism and Install the Access Control Policy upgrade the passive node M2 to R81.10 - D. 1) Enable the MVC mechanism on both cluster members #cphaprob mvc on
2) Upgrade the passive node M2 to R81.10
3) In SmartConsole. change the version of the cluster object
4) Install the Access Control Policy
5) After examine the cluster states upgrade node M1 to R81.10
6) On each Cluster Member, disable the MVC mechanism and Install the Access Control Policy
Answer: C
NEW QUESTION # 129
If you needed the Multicast MAC address of a cluster, what command would you run?
- A. cphaprob -a if
- B. cphaconf debug data
- C. cphaconf ccp multicast
- D. cphaprob igmp
Answer: D
NEW QUESTION # 130
What is the protocol and port used for Health Check and State Synchronization in ClusterXL?
- A. CCP and 18190
- B. CPC and 8116
- C. CCP and 257
- D. CCP and 8116
Answer: D
NEW QUESTION # 131
You had setup the VPN Community VPN-Stores'with 3 gateways. There are some issues with one remote gateway(1.1.1.1) and an your local gateway. What will be the best log filter to see only the IKE Phase 2 agreed networks for both gateways
- A. Blade:"VPN" AND VPN-Stores AND Main Mode
- B. action:"Key Install" AND 1.1.1.1 AND Main Mode
- C. Blade:"VPN" AND VPN-Stores AND Quick Mode
- D. action:"Key Install- AND 1.1.1.1 ANDQuick Mode
Answer: A
NEW QUESTION # 132
In Threat Prevention, you can create new or clone profiles but you CANNOT change the out-of-the-box profiles of:
- A. General, Escalation, Severe
- B. General, purposed, Strict
- C. Basic, Optimized, Severe
- D. Basic, Optimized, Strict
Answer: D
NEW QUESTION # 133
What will SmartEvent automatically define as events?
- A. Firewall
- B. IPS
- C. HTTPS
- D. VPN
Answer: B
NEW QUESTION # 134
You need to change the MAC-address on eth2 interface of the gateway. What command and what mode will you use to achieve this goal?
- A. set interface eth2 hw-addr 11:11:11:11:11:11; CLISH
- B. ifconfig eth1 hw 11:11:11:11:11:11; expert
- C. ethtool -i eth2 mac 11:11:11:11:11:11; expert
- D. set interface eth2 mac-addr 11:11:11:11:11:11; CLISH
Answer: D
NEW QUESTION # 135
What CLI command compiles and installs a Security Policy on the target's Security Gateways?
- A. fwm load
- B. fwm fetch
- C. fwm compile
- D. fwm install
Answer: A
NEW QUESTION # 136
Fill in the blank: Identity Awareness AD-Query is using the Microsoft _______________ API to learn users from AD.
- A. WMI
- B. Services.msc
- C. Eventvwr
- D. XML
Answer: A
NEW QUESTION # 137
......
The CheckPoint 156-315.81 exam covers a range of topics that are essential for security professionals, including network security principles, firewall technologies, VPNs, and intrusion prevention systems. It also covers advanced topics such as threat prevention, security management, and cloud security. 156-315.81 exam is designed to test both theoretical knowledge and practical skills, making it an ideal certification for security professionals who want to enhance their expertise in Check Point's security technologies.
Easy Success CheckPoint 156-315.81 Exam in First Try: https://www.bootcamppdf.com/156-315.81_exam-dumps.html
A Fully Updated 156-315.81 Exam Dumps - PDF Questions and Testing Engine: https://drive.google.com/open?id=1dpZmvU3zZgR9FaH87JBJ1Tzj6b_3lu3k