Use 700-905 Exam Dumps (2022 PDF Dumps) To Have Reliable 700-905 Test Engine
700-905 PDF Recently Updated Questions Dumps to Improve Exam Score
Cisco 700-905 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
NEW QUESTION 11
Which statement about Standalone Cisco UCS Server Deployments is valid?
- A. They require Cisco Fabric Interconnects to operate, which reduces the Operating Expenses (OpEx)
associated with the deployment - B. They do not require Cisco Fabric Interconnects to operate, which reduces the Operating Expenses
(OpEx) associated with the deployment - C. They require Cisco Fabric Interconnects to operate, which reduces the Capital Expenses (CapEx)
associated with the deployment - D. They do not require Cisco Fabric Interconnects to operate, which reduces the Capital Expenses (CapEx)
associated with the deployment
Answer: A
NEW QUESTION 12
There are often disadvantages when using mixed hardware, and uniform systems are highly advised. What are
three disadvantages of using validated yet mixed hardware? (Choose three.)
- A. Validated yet "mixed" hardware systems may be supported by the
specific original equipment manufacturers but software vendors require a master level services
agreement. - B. "Software only" HCI solutions often mean that HCI vendors do not have control over the hardware that
the consumer is using. The lack of control over the hardware can result in hardware not being
security-compliant (usually the case with white box solutions) or not being optimally configured for the
given HCI solution. - C. "Software only" solutions can result in a lack of simplicity for installation and maintenance. While setup
and maintenance of an HCI solution might be simple you still need to configure and maintain the
hardware part, which is not orchestrated by the HCI solution. - D. "Software only" solutions are inherently more secure, adhering to government regulations.
- E. "Hardware only" solutions require less latency for data aggregation.
- F. Validated hardware does not mean smooth performance, which particularly applies to hardware that is
seldom chosen for the hardware part of the "software only" solution.
Answer: A,E,F
NEW QUESTION 13
How many DIMMs are supported per memory channel in the Cisco UCS M5 server?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
Explanation:
NEW QUESTION 14
Drag the server type from the left onto the maximum number of capacity drives on the right.
Which three capabilities are provided by Virtual Interface Cards'? (Choose three.)
- A. The virtual interfaces created by a VIC do not accommodate hypervisor communication like VMkernel
interfaces on vSphere. - B. Virtualizing object storage environments by pushing meta data directly to the management server
- C. A virtual environment, such as VMware vSphere, provides VM connectivity via a virtual switch to
individual virtual machines bypassing local hardware requests. - D. Multiple-interface-card virtualization without any additional driver requirements with integration of the
virtualized cards into the Fabric Interconnect infrastructure. - E. Management through Cisco IMC or UCS Manager with dynamic configuration of virtual interface cards
based on the server profile (MAC/WWN). - F. Traffic processing for internal and external communication supporting simultaneous HBA and NIC
operation on the same physical hardware.
Answer: C,D,E
NEW QUESTION 15
How much memory is reserved for the controller VM in the HX220c?
- A. 12 GB
- B. 48 GB
- C. 24 GB
- D. 78 GB
Answer: B
Explanation:
NEW QUESTION 16
Which two components are automatically configured from the information provided to the HyperFlex
installer? (Choose two )
- A. controller VM configuration
- B. operating system deployment preparation
- C. application dependencies
- D. the network
- E. server firmware policy
Answer: A,D
NEW QUESTION 17
When local writing or reading is performed, the lOVisor intercepts the read/write requests and forwards them
to CVMs across the cluster This action allows non-local CVMs to be aware of the input/output requests so that
they can perform the appropriate input/output action lOVisor provides which two additional functionalities?
(Choose two.)
- A. integration point for deployment of cloud-based SaaS offerings from eco-system partners
- B. enables asynchronous replication of data across individual HyperFlex nodes with sub-second
re-convergence - C. intercepts local virtual machines' reads and writes and distributes them across the network eliminating
hotspots - D. when an lOVisor fails, the CVM remains active and functional, which enables uninterrupted operation
of the system by forwarding 10 to another available lOVisor In the HyperFlex cluster - E. provides redundancy when local CVM fails, offloading data processing to another CVM in the cluster
Answer: B,D
NEW QUESTION 18
If a GPU card is Installed in HyperFlex nodes before a cluster is created, which action can be used to automatically build the service profile in UCS Manager?
- A. Check the GPU workflow during the cluster creation process
- B. Check the extended memory option during the cluster creation process
- C. Check the administrative workflow option during the cluster creation process
- D. Check Run UCS Manager Configuration during the cluster creation process
Answer: A
Explanation:
NEW QUESTION 19
If a GPU card is Installed in HyperFlex nodes before a cluster is created, which action can be used to
automatically build the service profile in UCS Manager?
- A. Check the GPU workflow during the cluster creation process
- B. Check the extended memory option during the cluster creation process
- C. Check the administrative workflow option during the cluster creation process
- D. Check Run UCS Manager Configuration during the cluster creation process
Answer: A
NEW QUESTION 20
Which three features for NVMe transfer protocol are valid? (Choose three.)
- A. Requires 10 controller
- B. Improves SAS and SATA speed
- C. Increases memory speed for more lOPs
- D. Uses PCIe interface
- E. Streamlined commands for fewer CPU instructions
- F. More and deeper queues
Answer: D,E,F
Explanation:
NEW QUESTION 21
With which three components must every HyperFlex cluster be equipped with in regard to disks?
(Choose three.)
- A. same type of cache drives
- B. there are no specific requirements
- C. SAS drives
- D. same type and size of capacity of drives
- E. same number of capacity drives
- F. NVMe drives
Answer: A,D,E
Explanation:
NEW QUESTION 22
How much memory is reserved for the controller VM in the HX220c?
- A. 12 GB
- B. 48 GB
- C. 24 GB
- D. 78 GB
Answer: B
NEW QUESTION 23
When building a HyperFlex cluster which two recommendations should be followed? (Choose two.)
- A. Use the same server model for the cluster.
- B. Use HX 220s for compute nodes and HX 240s for converged nodes
- C. Use the same CPU model but memory configuration can be different.
- D. Use B-Series servers to improve converged node scale.
- E. Use the same server configuration for the cluster.
Answer: A,E
NEW QUESTION 24
HyperFlex compute nodes contribute what percentage of the overall disk storage capacity?
- A. 20%
- B. 0%
- C. 10%
- D. 5%
Answer: B
Explanation:
NEW QUESTION 25
What is the maximum size of an HXDP cluster running 3.5.1?
- A. 32 nodes
- B. 8 nodes
- C. 64 nodes
- D. 16 nodes
Answer: C
NEW QUESTION 26
HyperFlex uses file system native snapshots and provides which three features? (Choose three.)
- A. automatic update to the golden image when a configuration change is made
- B. automatically deduplicating data of snapshots through StorFS
- C. limitations in age and number of snapshots. See user manual for limitations
- D. on datastore level, snapshots work the same as vSphere snapshots
- E. consolidation of snapshots is still manual but not necessary
- F. impact on the VM performance after a lot of writes, requiring future administration
Answer: B,C,D
NEW QUESTION 27
What is required to cluster a pair of Fabric Interconnects?
- A. UCS Manager 2.1 or better
- B. connection between the Fl pair using ports L1 and L2
- C. uplink connections to the enterprise network
- D. HXDP 3.5.2 or better
Answer: B
NEW QUESTION 28
How many memory channels does the Cisco UCS M5 server support per CPU?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION 29
Which two processes does Disk Failure initiate? (Choose two)
- A. Self-healing mode is initiated and data replication factors applied.
- B. The affected cluster is marked as unhealthy and placed into standby mode
- C. If the replication factor is sufficient for the failure, the system is marked as unhealthy but remains
operational - D. Performance is almost unaffected Sets 1-minute timer until self-healing starts.
- E. Distributed pooled data is migrated off nodes to master data store.
Answer: A,D
NEW QUESTION 30
Which Cisco UCS Server running HXDP supports the largest storage pool?
- A. UCS B480
- B. HX 240
- C. HX220
- D. UCS B200
Answer: B
NEW QUESTION 31
What does the letter W indicate when selecting CPUs for your HX Node (le. HX-CPU 8170M)?
- A. support for all flash drive array
- B. support of 1.5 TB/socket of memory
- C. support for NVMe
- D. support for 768 TB/socket of memory
Answer: B
NEW QUESTION 32
Which three configurations for read caching in Cisco HyperFlex are valid? (Choose three.)
- A. Write-back (default): Only write information and most commonly used information are deposited in the cache
- B. No caching (SSD): With all-flash nodes; because there is little difference in read speeds between SSDs
- C. Level 4 cached (SSD): With semi-flash nodes; there is a large difference in read speeds between SSDs
- D. Write-first (default for VDI): Infrequently used data is cached: freeing system resources for VDI performance
- E. Battery-Initiated Read-back (default): Only read data and most commonly used data are deposited in the Level 4 read-back cache
- F. Write-through (install option for VDI): Only most commonly used data is cached: optimizing VDI performance
Answer: A,B,F
Explanation:
NEW QUESTION 33
HyperFlex virtual servers differ from regular servers in which two key areas? (Choose two.)
- A. CCC: Cisco Cloud Center is used for multi-cloud integration and seamless deployment.
- B. CVM: Virtual appliance, which performs reading/writing, caching, deduplication, and compression.
- C. No RAID is required to consolidate disks into a shared data platform.
- D. NVMe: Regular servers do not support NVMe drives for high availability.
- E. SP: UCS Service Profiles are used to delineate MAC address pools from upstream networks.
Answer: B,C
NEW QUESTION 34
Which three features do Managed Deployments provide? (Choose three.)
- A. Great tor managing large deployments, scalability, and oversight of the UCS servers.
- B. Consistent deployment by replicating working configurations from development labs to the production
deployment - C. Individual configuration of each redundant fabric or global configuration.
- D. High availability of the management system and connectivity when using 2 Cisco Fabric Interconnects
- E. Decentralized yet complex management of an entire UCS domain.
- F. Increased operating overhead, raising Operating Expenses (OpEx)
Answer: A,D,F
NEW QUESTION 35
......
700-905 Dumps Full Questions with Free PDF Questions to Pass: https://www.bootcamppdf.com/700-905_exam-dumps.html