Latest HPE6-A75 Pass Guaranteed Exam Dumps with Accurate & Updated Questions
HPE6-A75 Exam Brain Dumps - Study Notes and Theory
NEW QUESTION # 33
A company has AOS-Switches deployed at sites with inexperienced IT staff. The main office network administrators want to track if configurations change on branch switches. What should be set up for this purpose?
- A. an lP SLA profile
- B. an RMON alarm
- C. an auto-config server
- D. an SNMP trap
Answer: D
NEW QUESTION # 34
What must an OSPF router do when it receives a link state update?
- A. It must re-establish adjacency with its Designated Router and Backup DR.
- B. It must initiate a graceful restart timer.
- C. It must run the shortest path first algorithm.
- D. It must participate in a new election for the Designated Router and Backup DR.
Answer: C
NEW QUESTION # 35
What is true about clustering and AP connections to cluster members?
- A. During rebalancing, the active load is redistributed first.
- B. AP load balancing is disabled by default.
- C. The AP will always stay connected to the LMS IP address configured in the AP profile.
- D. The default thresholds are 75% for the Rebalanced Threshold and 25% for the Unbalanced Threshold.
Answer: B
NEW QUESTION # 36
Which ArubaOS CLl command can an administrator execute to determine if AP load balancing is enabled in a cluster?
- A. show ap active
- B. show aaa cluster essid
- C. show switches
- D. show lc-cluster group-membership
Answer: D
NEW QUESTION # 37
OSPF is configured on an AOS-Switch, and the network administrator sets the router ID to 10.0.0.1. The administrator wants to be able to reach the switch at this ID from any location throughout the OSPF system. The administrator also needs the router ID to De stable and available, even if some links on the switch fail.
What should the administrator do?
- A. Make sure that 10.0.0.1 is the IP address on the VLAN with the lowest ID.
- B. Configure 10.0.0.1 as a secondary IP address on the switch 00BM poet.
- C. Configure 10.0.0.1 on a loopback interface, and enable OSPF on that interface.
- D. Configure 10.0.0.1 as a manual OSPF neighbor on each switch in the OSPF system.
Answer: C
NEW QUESTION # 38
What is a primary use case for RPVST+ on AOS-Switches?
- A. seamless integration with RSTP
- B. enhanced loop protection in an MSTP network
- C. more granular load balancing than MSTP when access switches connect to two core switches
- D. integration of AOS-Switches in a heterogeneous vendor network that uses the Cisco protocol
Answer: D
NEW QUESTION # 39
Refer to the exhibit.
A network administrator sets up 802.1X authentication to a RADIUS server on an AOS-Switch. The RADIUS server and user devices are both set up to use REAP MSCHAPv2. The administrator tests the authentication and sees the output shown in the exhibit. Which issue could cause this output?
- A. The switch port is set for user mode 801. IX. but the RADIUS server is set for port mode.
- B. The RADIUS shared secret does not match on the switch and the server.
- C. The administrator entered the wrong password for the test account.
- D. The switch does not have a certificate tor port-access installed on the switch.
Answer: B
NEW QUESTION # 40
Refer to the exhibit.
An administrator implements AP licensing on a Mobility Master (MM).
- Each campus is responsible to purchase its own AP licenses.
- There are 900 AP licenses deployed in the global pool.
- There are three dedicated pools.
- From the global pool, 300 AP licenses are assigned to each dedicated
pool.
Network engineers at CampusA want to deploy an additional 100 APs. Currently all of the AP licenses in CampusA and CampusB are allocated, but only 200 of the AP licenses in CampusC are allocated.
What can the administrator do to add capacity for CampusA in alignment with campus policies?
- A. Add 100 more AP licenses to the global pool.
- B. Allow CampusA to share from the CampusC pool.
- C. Move 100 licenses from the CampusC pool to the global pool.
- D. Add 100 more AP licenses and assign them to the CampusA pool.
Answer: D
Explanation:
Each campus is responsive to purchase its own AP licenses.
You could not take licenses from CampusC.
NEW QUESTION # 41
An administrator mistakenly configures the wrong VLAN setting on a managed controller's interface. This causes the controller to lose management access to the Mobility Master (MM).
Which mechanism will then attempt to restore the previous working configuration on the managed controller?
- A. bulk configuration
- B. disaster recovery
- C. auto-rollback
- D. restore config
Answer: C
NEW QUESTION # 42
Which protocol do Mobility Controllers (MCs) use to detect a failed Mobility Master (MM)?
- A. SNMP
- B. PAPI
- C. VRRP
- D. IPSec
Answer: A
NEW QUESTION # 43
An AOS-Switch needs to implement tunneled node in role-based mode. Aruba ClearPass is configured to assign users for which the traffic should be tunneled to a role named tunnel. The Aruba Mobility Controller should apply policies associated with the employees group to these users.
What is the correct user role configuration on the AOS-Switch for this scenario?
- A. two user roles, one named tunnel that uses the tunneled-node-redirect command, and one named employees
- B. two user roles, one named employees that uses the tunneled-node-redirect command, and one named tunnel
- C. one user role named tunnel with employees set as the secondary role in the tunneled-node- command redirect
- D. one user role named employees with tunnel set as the secondary role in the tunneled-node- command redirect
Answer: D
NEW QUESTION # 44
Refer to the exhibit.
A company has attempted to implement OSPF without success. The devices in Area I need to be able to reach Area 2. Routes should be aggregated for advertisement in other areas. What must be changed to meet these requirements?
- A. Change Area 3 to Area 0; remove Area 1 from Switch-2 and Area 2 from Switch-1.
- B. Move the 10.1.0.0/16 range to Area 2 on Switch-1 and the 10.2.0.0/16rangetoArea 1 onSwitch-2.
- C. Add the 10.2.0.0/16 range on Swttch-1 and the 10.1.0.0/16 range on Switch-2.
- D. Add Area 1 and Area 2 on VIAN 100 on both Switch-1 and Switch-2. Remove Area 3.
Answer: A
NEW QUESTION # 45
Refer to the exhibit.
Based on the configuration of me create_user form shown, which statement accurately describes the status?
- A. The visitor_company field will be visible to the guest users when they access the web login page.
- B. The visitor_phone field will be visible to operators creating the account.
- C. The visitor_phone field will be visible to the guest users in the web login page.
- D. The visitor_company field will be visible to operators creating the account.
- E. The email field will be visible to guest users when they access the web login page.
Answer: E
NEW QUESTION # 46
Refer to the exhibit.
Controllers are configured m a cluster as shown in the exhibit. These are the network details.
* A Mobility Master (MM) manages the cluster.
* The cluster contains two controllers: C l and C2.
* API and AP2 use CI as their Active AP Anchor Controller (A-AAC). with C2 as their Standby AAC (S-AAC).
* AP3 and AP4 use C2 as their A-AAC, with CI as their S-AAC.
User1 establishes a wireless connection via API, where the Active User Anchor Controller (A-UAC) assigned is CI. with C2 as the standby. What happens when User I roams the wireless network and eventually their session is handled by AP3?
- A. The AP3's A-AAC switches to C1, and the user's A-UAC remains on C1.
- B. The AP3's A-AAC switches to C1, and the user's A-UAC remains on C2.
- C. The AP3's A-AAC switches to C2, and the user's A-UAC remains on C2.
- D. The AP3's A-AAC switches to C2, and the user's A-UAC remains on C1.
Answer: C
NEW QUESTION # 47
Which solution allows administrators to monitor link status and port utilization on AOS-Switches from a centralized location?
- A. Aruba Mobility Manager
- B. Aruba AirWave
- C. Aruba ClearPass
- D. Aruba Mobility Controller
Answer: B
NEW QUESTION # 48
A university wants to deploy ClearPass with the Guest module. They have two types of users that need to use web login authentication. The first type of users are students whose accounts are in an Active Directory server. The second type of users are friends of students who need to self-register to access the network.
How should the service be setup in the Policy Manager for this Network?
- A. Guest User Repository as the authentication source, and Guest User Repository and Active Directory server as authorization sources
- B. Guest User Repository as the authentication source and the Active Directory server as the authorization source
- C. Guest User Repository and Active Directory server both as authentication sources
- D. Active Directory server as the authentication source, and Guest User Repository as the authorization source
- E. Either the Guest User Repository or Active Directory server should be the single authentication source
Answer: C
NEW QUESTION # 49
......
HP HPE6-A75 (Aruba Certified Edge Professional) certification exam is designed to test the knowledge and skills of IT professionals in the area of networking and wireless technologies. Aruba Certified Edge Professional Exam certification is ideal for those who work in the field of wireless networking and are looking to demonstrate their expertise in the deployment, management, optimization, and troubleshooting of Aruba networks.
HPE6-A75 exam covers a wide range of topics related to wireless networking, such as configuring and troubleshooting Aruba wireless networks, working with access points and controllers, and implementing security measures to protect wireless networks from unauthorized access. HPE6-A75 exam also evaluates the candidate's ability to manage and optimize network performance, as well as their knowledge of industry-standard wireless technologies.
Pass HP HPE6-A75 Test Practice Test Questions Exam Dumps: https://www.bootcamppdf.com/HPE6-A75_exam-dumps.html
The Best HPE ACEP Study Guide for the HPE6-A75 Exam: https://drive.google.com/open?id=1cBEsP4TIILvr0ImmFXIGfYLg4NV_fUrb