[Full-Version] 2022 New BootcampPDF 300-410 PDF Recently Updated Questions
300-410 Exam with Guarantee Updated 240 Questions
What Are the Objectives of Cisco ENARSI 300-410?
Being one of the most difficult exams to succeed at, Cisco ENARSI 300-410 has an extensive number of domains covered and broad content. The knowledge and skills networking professionals stand to gain in completing this test will surely set the course for a brilliant career in the field. The main objectives involved are listed below:
Covering topics such as how to troubleshoot administrative distance, EIGRP, OSPF, and BGP, the Layer 3 technologies domain of the exam will carry about 35% of the total questions. One will also be tested on how to configure policy-based routing, VRF-Lite, verifying VRF-Lite, and other concepts.
- Layer 3 technologies
The second section focuses on assessing the candidate's abilities in explaining Multi-protocol Label Switching (MPLS) operations such as LSR, LDP, and LSP; Layer 3 VPNs using MPLS; configuring DMVPN, including Dynamic neighbor, Ipsec, Spoke-to-spoke, etc. This domain as a whole will account for 20% of the tasks presented in the exam.
- Services and automation in infrastructure
The next part of the test checks and proves one's skills in carrying out router security features' troubleshooting; explaining IPv6 First Hop security features such as DHCP guard, source guard, RA guard, etc.; usage of IOS AAA for troubleshooting security in devices; and how to troubleshoot CoPP. This section too has a weightage of 20% of the exam content.
Amounting to the rest 25% of the items in 300-410 exam, the infrastructure services and automation domain will examine the candidate's knowledge in troubleshooting SNMP versions v2c and v3; DHCP in both IPv4 and IPv6; managing devices (Console, Telnet, HTTP, and HTTPS, among others); v5, v9 and flexible NetFlow. More common areas that require candidate to possess sound knowledge in cover troubleshooting network issues using local, syslog and debug files as well as using the Cisco DNA Centre Assurance for network problem troubleshooting.
- Infrastructure security
Cisco 300-410 is a concentration exam that the applicants have to pass in order to obtain two certifications: Cisco Certified Specialist – Enterprise Advanced Infrastructure Implementation and CCNP Enterprise. This test measures their knowledge and skills in implementing and troubleshooting advanced routing services & technologies. These include Layer 3, VPN services, infrastructure security, infrastructure automation, and infrastructure services. Moreover, the potential candidates for the CCNP Enterprise certificate must take the core exam, which is Cisco 350-401, to fulfill the requirements for getting this sought-after certification.
NEW QUESTION 71
Refer to the exhibit.
Users report that IP addresses cannot be acquired from the DHCP server. The DHCP server is configured as shown. About 300 total nonconcurrent users are using this DHCP server, but none of them are active for more than two hours per day. Which action fixes the issue within the current resources?
- A. Configure the DHCP lease time to a bigger value
- B. Add the network 192.168.2.0 255.255.255.0 command to the DHCP pool
- C. Configure the DHCP lease time to a smaller value
- D. Modify the subnet mask to the network 192.168.1.0 255.255.254.0 command in the DHCP pool
Answer: C
NEW QUESTION 72
R2 has a locally originated prefix 192.168.130.0/24 and has these configurations:
What is the result when the route-map OUT command is applied toward an eBGP neighbor R1 (1.1.1.1) by using the neighbor 1.1.1.1 route-map OUT out command?
- A. R1 does not forward traffic that is destined for 192.168.130.0/24.
- B. Network 192.168.130.0/24 is not allowed in the R1 table.
- C. R1 sees 192.168.130.0/24 as two hops away instead of one AS hop away
- D. R1 does not accept any route other than 192.168.130.0/24.
Answer: C
NEW QUESTION 73
Refer to the exhibit.
Which statement about R1 is true?
- A. RIP learned routes are distributed to OSPF with a tag value of one.
- B. R1 adds one to the metric for RIP learned routes before redistributing to OSPF.
- C. RIP routes are redistributed to OSPF without any changes.
- D. OSPF redistributes RIP routes only if they have a tag of one.
Answer: A
NEW QUESTION 74
What are two purposes of using IPv4 and VPNv4 address-family configurations in a Layer 3 MPLS VPN?
(Choose two.)
- A. MP-BGP is used to allow overlapping IPv4 addresses between customers to advertise through the network.
- B. RD is prepended to the IPv4 route to make it unique.
- C. The IPv4 address is needed to tag the MPLS label.
- D. The VPNv4 address consists of a 64-bit route distinguisher that is prepended to the IPv4 prefix.
- E. The VPNv4 address is used to advertise the MPLS VPN label.
Answer: A,B
NEW QUESTION 75
Refer to the exhibit.
Users in the branch network of 2001:db8:0:4::/64 report that they cannot access the Internet. Which command is issued in IPv6 router EIGRP 100 configuration mode to solve this issue?
- A. Issue the eigrp stub command on R2.
- B. Issue the eigrp stub command on R1.
- C. Issue the no eigrp stub command on R1
- D. Issue the no eigrp stub command on R2.
Answer: C
NEW QUESTION 76
Which protocol is used to determine the NBMA address on the other end of a tunnel when mGRE is used?
- A. MP-BGP
- B. NHRP
- C. OSPF
- D. IPsec
Answer: C
NEW QUESTION 77
Drag and drop the addresses from the left onto the correct IPv6 filter purposes on the right.
Answer:
Explanation:
NEW QUESTION 78
Refer to the exhibit.
The OSPF routing protocol is redistributed into the BGP routing protocol, but not all the OSPF routes are distributed into BGP Which action resolves the issue?
- A. Use a route-map command to redistribute OSPF external routes defined in an access list
- B. Include the word external in the redistribute command
- C. Use a route-map command to redistribute OSPF external routes defined in a prefix list.
- D. Include the word internal external in the redistribute command
Answer: A
NEW QUESTION 79 
Refer to the exhibit. an engineer is trying to get 192.168.32.100 forwarded through 10.1.1.1, but it was forwarded through 10.1.1.2. What action forwards the packets through 10.1.1.1?
- A. Configure EIGRP to receive 192.168.32.0 route with lower metric.
- B. Configure EIGRP to receive 192.168.32.0 route with equal or longer prefix than /24.
- C. Configure EIGRP to receive 192.168.32.0 route with lower admin distance.
- D. Configure EIGRP to receive 192.168.32.0 route with longer prefix than /19.
Answer: B
NEW QUESTION 80
An engineer configured access list NON-CISCO in a policy to influence routes
What are the two effects of this route map configuration? (Choose two.)
- A. Packets are dropped by the access list.
- B. Packets are forwarded using normal route lookup.
- C. Packets are not evaluated by sequence 10.
- D. Packets are forwarded to the default gateway.
- E. Packets are evaluated by sequence 10.
Answer: A,E
Explanation:
Explanation
https://www.cisco.com/c/en/us/support/docs/ip/ip-routed-protocols/47121-pbr-cmds-ce.html
NEW QUESTION 81
Refer to the exhibit.
A user cannot SSH to the router. What action must be taken to resolve this issue?
- A. Configure transport input ssh
- B. Configure transport output ssh
- C. Configure ip ssh version 2
- D. Configure ip ssh source-interface loopback0
Answer: A
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960x/software/15-0_2_EX/security/configurati
960-x_cg_chapter_01001.html
NEW QUESTION 82
- A.
- B.
- C.
- D.
- E. The technician at the remote site misconfigured VRF on the router.
Which configuration will resolve connectivity for both sites of customer_a?
Answer: A
Explanation:
Section: Mixed Questions
NEW QUESTION 83
Refer to the exhibit.
ISP 1 and ISP 2 directly connect to the Internet. A customer is tracking both ISP links to achieve redundancy and cannot see the Cisco IOS IP SLA tracking output on the router console. Which command is missing from the IP SLA configuration?
- A. Start-time 00:00
- B. Start-time immediately
- C. Start-time now
- D. Start-time 0
Answer: C
NEW QUESTION 84
Refer to the exhibit.
Which routes from OSPF process 5 are redistributed into EIGRP?
- A. E1 and E2 subnets matching access list TO-OSPF
- B. only E1 subnets matching prefix listTO-OS1
- C. E1 and E2 subnets matching prefix list TO-OSPF
- D. only E2 subnets matching access list TO-OSPF
Answer: A
NEW QUESTION 85
Drag and drop the packet from the left onto the correct descriptions on the right.
Answer:
Explanation:
Explanation
Data plane packets = User-generated packets that are always forwarded by network devices to other end-station devices Control plane packets - Network device generated or received packets that are used for the creation and operation of the network itself.
Management plane packets - Network device generated or received packets, or management station generated or received packets that are used to manage/operate the network Services plane packets = user generated packets that are forwarded by network devices to other end station devices, but that require higher priority than the normal traffic by the network devices.
https://tools.cisco.com/security/center/resources/copp_best_practices
NEW QUESTION 86
Refer to the exhibit.
Users report that IP addresses cannot be acquired from the DHCP server. The DHCP server is configured as shown. About 300 total nonconcurrent users are using this DHCP server, but none of them are active for more than two hours per day. Which action fixes the issue within the current resources?
- A. Configure the DHCP lease time to a bigger value
- B. Add the network 192.168.2.0 255.255.255.0 command to the DHCP pool
- C. Configure the DHCP lease time to a smaller value
- D. Modify the subnet mask to the network 192.168.1.0 255.255.254.0 command in the DHCP pool
Answer: C
NEW QUESTION 87
An engineer configured a leak-map command to summarize EIGRP routes and advertise specifically loopback
0 with an IP of 10.1.1.1.255.255.255.252 along with the summary route. After finishing configuration, the customer complained not receiving summary route with specific loopback address. Which two configurations will fix it? (Choose two.)
- A. Configure access-list 1 permit 10.1.1.1.0.0.0.252.
- B. Configure access-list 1 and match under route-map Leak-Route.
- C. Configure route-map Leak-Route permit 10 and match access-list 1.
- D. Configure route-map Leak-Route permit 20.
- E. Configure access-list 1 permit 10.1.1.0.0.0.0.3.
Answer: C,E
Explanation:
Explanation
When you configure an EIGRP summary route, all networks that fall within the range of your summary are suppressed and no longer advertised on the interface. Only the summary route is advertised. But if we want to advertise a network that has been suppressed along with the summary route then we can use leak-map feature. The below commands will fix the configuration in this question:
R1(config)#access-list 1 permit 10.1.1.0 0.0.0.3
R1(config)#route-map Leak-Route permit 10 // this command will also remove the "route_map Leak-Route deny 10" command.
R1(config-route-map)#match ip address 1
NEW QUESTION 88
Drag and drop the addresses from the left onto the correct IPv6 filter purposes on the right.
Answer:
Explanation:
Explanation
Same Answer is already updated below:
HTTP and HTTPs run on TCP port 80 and 443, respectively and we have to remember them.
Syslog runs on UDP port 514 while NTP runs on UDP port 123 so if we remember them we can find out the matching answers easily. But maybe there is some typos in this question as 2001:d88:800:200c::c/126 only ranges from 2001:d88:800:200c:0:0:0:c to 2001:d88:800:200c:0:0:0:f (4 hosts in total). It does not cover host 2001:0D88:0800:200c::1f. Same for 2001:D88:800:200c::e/126, which also ranges from
2001:d88:800:200c:0:0:0:c to 2001:d88:800:200c:0:0:0:f and does not cover host 2001:0D88:0800:200c::1c
.
NEW QUESTION 89
Refer to the exhibit.
An IP SLA was configured on router R1 that allows the default route to be modified in the event that Fa0/0 loses reachability with the router R3 Fa0/0 interface. The route has changed to flow through router R2. Which debug command is used to troubleshoot this issue?
- A. debug ip routing
- B. debug ip packet
- C. debug ip flow
- D. debug ip sla error
Answer: A
Explanation:
Explanation
debug ip routing This command enables debugging messages related to the routing table.
NEW QUESTION 90
Refer to the exhibit.
A router receiving BGP routing updates from multiple neighbors for routers in AS 690. What is the reason that the router still sends traffic that is destined to AS 690 to a neighbor other than 10.222.1.1?
- A. The route map is applied in the wrong direction.
- B. The local preference value should be set to the same value as the weight in the route map.
- C. The local preference value in another neighbor statement is higher than 250.
- D. The weight value in another neighbor statement is higher than 200.
Answer: A
NEW QUESTION 91
Drag and drop the MPLS VPN concepts from the left onto the correct descriptions on the right.
Answer:
Explanation:
NEW QUESTION 92
Refer to the exhibit.
What does the imp-null tag represent in the MPLS VPN cloud?
- A. Pop the label
- B. Include the EXP bit
- C. Impose the label
- D. Exclude the EXP bit
Answer: A
Explanation:
Explanation
The imp-null (implicit null) tag instructs the upstream router to pop the tag entry off the tag stack before forwarding the packet.
Note: pop means remove the top MPLS label
NEW QUESTION 93
......
Detailed Overview of Cisco 300-410 Exam
Cisco doesn’t reveal the details of its certification exams beforehand. You can’t find the information regarding the number of questions or their types before you actually sit for the real test. The passing scores for the exams are also not disclosed by the vendor and are subject to change.
What is known about the Cisco 300-410 exam is that you will have 90 minutes to complete all the questions. The test is delivered in the English or Japanese languages. To schedule this exam, you will need to create an account on the Pearson VUE platform. After that, you will have to pay the enrollment fee and choose one of the delivery options. You can take it in person at one of the testing centers or online from the comfort of your home or office.
Cisco 300-410 is one of the concentration exams that the applicants seeking to earn the CCNP Enterprise certificate can choose. Within this certification path, they will need also to pass one core test, known as Implementing Cisco Enterprise Network Core Technologies (ENCOR) or 350-401 ENCOR. Only acing both these exams makes you eligible for getting the professional-level certificate. As for Cisco Certified Specialist – Enterprise Advanced Infrastructure Implementation, the 300-410 test is the only requirement for this certification.
As any other professional- or specialist-level certifications of this vendor, CCNP Enterprise and Cisco Certified Specialist – Enterprise Advanced Infrastructure Implementation are valid for three years from the date of award. After the expiration of this period, the individuals will need to recertify to maintain their status. They can do that by taking additional exams or completing continuing education activities.
Latest 300-410 Pass Guaranteed Exam Dumps Certification Sample Questions: https://www.bootcamppdf.com/300-410_exam-dumps.html
300-410 Updated Exam Dumps [2022] Practice Valid Exam Dumps Question: https://drive.google.com/open?id=1qH031h67JLIUG39oA0ppv_s8xs6EfU_z