Free 2022 NS0-526 Dumps 100 Pass Guarantee With Latest Demo [Q33-Q58]

Free 2022 NS0-526 Dumps 100 Pass Guarantee With Latest Demo

Prepare NS0-526 Question Answers Free Update With 100% Exam Passing Guarantee [2022]

NEW QUESTION 33
When creating a new workflow in OnCommand Workflow Automation, what is the correct order to apply commands in your new workflow?
Response:

• A. numerically 1-to-999
• B. largest to smallest
• C. alphabetically A-to-Z
• D. left to right, top to bottom

Answer: D

 

NEW QUESTION 34
A customer wants a new solution that reaches a near-zero recovery time objective (RTO) and a zero recovery point objective (RPO).
In this scenario, which NetApp solution satisfies the requirements?

• A. SnapMirror
• B. SnapVault
• C. MetroCluster
• D. NDMP

Answer: A

 

NEW QUESTION 35
Click the Exhibit button.

Your customer has recently implemented a FabricPool solution that uses the default configuration. They notice that no data has moved to the cloud tier. Your customer is concerned that FabricPool might not be functioning properly.
Referring to the exhibit, what is causing the problem?

• A. The performance tier is not 90% full.
• B. The performance tier is not 75% full.
• C. The performance tier is not 50% full.
• D. The performance tier is not 100% full.

Answer: C

 

NEW QUESTION 36
You are upgrading your Data ONTAP cluster from clustered Data ONTAP 8.3 to clustered Data ONTAP 9.1.
Which two actions mustbe performed for the SnapMirror relationships?
(Choose two.)

• A. Break existing SnapMirror relationships.
• B. Delete the obsolete SnapMirror Snapshot copies which were created in Data ONTAP 8.3.
• C. After the upgrade, resynchronize, and resume SnapMirror relationships.
• D. Delete and re-create SnapMirror relationships.

Answer: A,C

 

NEW QUESTION 37
A company has a 4-node FAS9000 fabric MetroCluster cluster separated by 101 km. Site A has an unmirrored HDD aggregate. An FC-VI card fails in one of the nodes in site A and a switchover occurs.
Which statement is correct in this scenario?

• A. The distance is not supported.
• B. Only SSD aggregates are accessible.
• C. The aggregate is accessible using Site B's cluster.
• D. The aggregate is accessible using Site A's surviving node.

Answer: C

 

NEW QUESTION 38
You have a VMware VSphere environment with SRM and NetApp SRA fully configured.
Which two statements are true? (Choose two.)

• A. NetApp SRA supports the failover of SnapVault and SnapMirror relationships.
• B. NetApp clustered Data ONTAP supports a mixed ALUA configuration where some igroups have ALUA enabled and others do not.
• C. NetApp SRA supports both LUN attached and NFS mounted datastores.
• D. NetApp SRA supports the use of the FC protocol at one site and the iSCSI protocol at the other site.

Answer: C,D

 

NEW QUESTION 39
To assist with capacity planning, your supervisor wants to receive weekly capacity summary reports using e- mail for all on-premises ONTAP clusters. You are asked to implement a solution that has no additional software licensing costs.
Which action accomplishes this task?

• A. Configure Cloud Insights Premium Edition.
• B. Configure capacity and utilization reports in Active IQ Unified Manager.
• C. Configure Cloud Insights Basic Edition.
• D. Create a capacity dashboard in Active IQ Digital Advisor.

Answer: B

 

NEW QUESTION 40
Which two statements are correct about MetroCluster IP requirements for intercluster LIFs? (Choose two.)

• A. A dedicated network port is required.
• B. Either an IPv6 address or IPv4 address is required.
• C. At least one interface per node is required.
• D. Jumbo frames are required.

Answer: A,B

 

NEW QUESTION 41
What are three methods of configuring SnapMirror replication relationships? (Choose three.)

• A. Use Active IQ.
• B. Use ONTAP System Manager.
• C. Use OnCommand Insight.
• D. Use Active IQ Unified Manager.
• E. Use the ONTAP command line.

Answer: B,C,D

 

NEW QUESTION 42
Click the Exhibit button.

Referring to the exhibit, what must be performed on nodes aff-01 and aff-02 to allow them to failover and giveback properly?

• A. Move the LIFs to their home ports.
• B. Disconnect the HA connection between the nodes.
• C. No additional action is necessary.
• D. Reboot aff-02 to resolve the LIF issue.

Answer: A

 

NEW QUESTION 43
Your customer wants to implement a mirroring solution between two NetApp controllers. Which solution would you recommend tothe customer?
Response:

• A. SnapMirror
• B. Snapshot copies
• C. SnapRestore
• D. Snapcreator

Answer: A

 

NEW QUESTION 44
You received an alert from OnCommand Unified Manager (OCUM) that a NetApp FlexVol is almost out of space. Which three actions are available to perform from the OCUM events detail Web page?
(Choose three.)

• A. Acknowledge the event.
• B. Increase the capacity of the FlexVol.
• C. Add a note to the event.
• D. Create a job to move the FlexVol.
• E. Mark the event as "resolved".

Answer: A,C,E

 

NEW QUESTION 45
You have a network outage that affects client access to site

• A. You need to temporarily reverse the SnapMirror relationship of a volume to serve data from site B.
  Which two steps must you perform first?
  (Choose two.)
• B. Delete the SnapMirror relationship.
• C. Abort the SnapMirror relationship.
• D. Break the SnapMirror relationship.
• E. Take the source volume offline.

Answer: A,E

 

NEW QUESTION 46
What are three prerequisites for replicating an Element OS volume to ONTAP? (Choose three.)

• A. The ONTAP cluster must be running ONTAP 9.3 or later.
• B. Enable SnapMirror on the SolidFire cluster.
• C. SnapMirror must be licensed on the ONTAP cluster.
• D. SnapVault must be licensed on the ONTAP cluster.
• E. SnapMirror must be licensed on the SolidFire cluster.

Answer: B,C,E

 

NEW QUESTION 47
Click the Exhibit button.

You have a SnapProtect v11 environment as shown in the exhibit.
What are the two defaultSnapshot copies created automatically after creating a Storage Policy. (Choose two.)

• A. Primary (Tape)
• B. Primary (Classic)
• C. primary (Snap)
• D. Primary (NetApp)

Answer: B,C

 

NEW QUESTION 48
A customer needs to report on the SnapMirror and SnapVault relationships in their cluster. Which two tools provide this information?
(Choose two.)

• A. OnCommand Unified Manager
• B. OnCommand System Manager
• C. OnCommand Insight
• D. Config Advisor

Answer: A,B

 

NEW QUESTION 49
You have a SnapVault backup from your primary site to your secondary site with a LUN in the volume. In this scenario, what is transferred?
Response:

• A. LUN mapping status
• B. UUID
• C. serial number
• D. selected Snapshot copies

Answer: D

 

NEW QUESTION 50
You are calculating transfer time for SnapMirror replication between two NetApp clusters.
Which three factors should be included in your consideration? (Choose three.)

• A. TCP window size
• B. data size to transfer
• C. latency between clusters
• D. SnapMirror schedule
• E. retention policy

Answer: A,B,C

 

NEW QUESTION 51
You have set up a SnapMirror relationship between two SVMs for data protection. The data in the source volume is unavailable due to an event related to a virus infection leading to data corruption.
In this scenario, which three actions are required to activate the SnapMirror destination volume and provide data access to the users? (Choose three.)

• A. Perform a SnapMirror quiesce operation.
• B. Disable the source volume by taking it offline.
• C. Configure the destination volume for data access.
• D. Perform a SnapMirror break operation.
• E. Verify the status of the source and destination volumes.

Answer: C,D,E

 

NEW QUESTION 52
You are using OnCommand Unified Manager to monitor the health and availability of your data protection relationships.
In this situation, what must be added to enable you to create, break, and resynchronize relationships?

• A. OnCommand Workflow Automation
• B. OnCommand Insight
• C. OnCommand System Manager
• D. SnapCenter

Answer: A

 

NEW QUESTION 53
When volumes are set to be thin-provisioned, what must be monitored for space usage?

• A. volume clone space
• B. aggregate
• C. Snapshot reserve
• D. LUN

Answer: B

 

NEW QUESTION 54
A customer hassetup an SVM DR relationship to provide disaster recovery capability at the SVM level.
The secondary site has a different network configuration. They want to replicate the protocol and services configuration of the primary SVM to the secondary SVM when creating the SVM DR relationship.
Which two actions will accomplish this task? (Choose two.)

• A. Set the identity preserve option to false.
• B. Set the vserver-dr-protection unprotected option.
• C. Set the identity preserve option to true.
• D. Set the discard configuration network option.

Answer: C,D

 

NEW QUESTION 55
Network bandwidth between your the primary and secondary sites is limited. You believe that data compression combined with volume SnapMirror would help solve this problem.
In this scenario, which statement is correct?

• A. A SnapMirror source cannot be compressed but the destination volume can be.
• B. Data compression can be enabled on the source storage system and will remain intact through SnapMirror.
• C. Data compression and SnapMirror are incompatible.
• D. Compression can be enabled independently between the source and the destination.

Answer: B

 

NEW QUESTION 56
A customer has a 2-node ONTAP Select HA cluster deployed on the same site. The ONTAP Deploy VM has been accidentally deleted. The 2-node ONTAP Select HA cluster is still serving data, but the storage failover capability has been disabled.
In this scenario, what would you do to reestablish the storage failover capability on your cluster?

• A. Deploy two ONTAP Deploy VMs and a new 2-node ONTAP Select cluster and then migrate the data.
• B. Deploy a secondary ONTAP Deploy VM and restore the 2-node cluster quorum.
• C. Deploy two single-node ONTAP Select clusters and migrate all exiting data.
• D. Deploy a new 4-node ONTAP Select cluster and distribute data from the existing cluster.

Answer: C

 

NEW QUESTION 57
An administrator wants to use SnapCenter 4.1 to back up and restore both their VMware Horizon environment and Microsoft SQL attached database.
In this scenario, which service account role should be configured to accomplish this task?

• A. backup
• B. operator
• C. administrator
• D. sysadmin

Answer: C

 

NEW QUESTION 58
......

Dumps Real Network Appliance NS0-526 Exam Questions [Updated 2022]: https://www.bootcamppdf.com/NS0-526_exam-dumps.html