[UPDATED 2026] Cisco 350-401 Questions Prepare with Free Demo of PDF
NEW 2026 Certification Sample Questions 350-401 Dumps & Practice Exam
To successfully pass the Cisco 350-401 exam, candidates need to have a strong understanding of network architecture, design, and configuration. They should be familiar with network automation, security, and troubleshooting. 350-401 exam also covers advanced topics such as wireless access, virtualization, and network programmability.
Passing the Cisco 350-401 ENCOR exam is a significant achievement for network engineers and administrators. It demonstrates their knowledge and expertise in implementing and troubleshooting complex enterprise networks. It also opens up new career opportunities in the field of networking, including roles such as network architect, network engineer, and network administrator.
NEW QUESTION # 158
Which method creates an EEM applet policy that is registered with EEM and runs on demand or manually?
- A. event manager applet ondemand
event none
action 1.0 syslog priority critical msg 'This is a message from ondemand' - B. event manager applet ondemand
action 1.0 syslog priority critical msg 'This is a message from ondemand' - C. event manager applet ondemand
event manual
action 1.0 syslog priority critical msg 'This is a message from ondemand' - D. event manager applet ondemand
event register
action 1.0 syslog priority critical msg 'This is a message from ondemand'
Answer: A
Explanation:
Explanation
An EEM policy is an entity that defines an event and the actions to be taken when that event occurs. There are two types of EEM policies: an applet or a script. An applet is a simple form of policy that is defined within the CLI configuration. answer 'event manager applet ondemand event register action 1.0 syslog priority critical msg 'This is a message from ondemand' <="" p="" style="box-sizing: border-box;">
There are two ways to manually run an EEM policy. EEM usually schedules and runs policies on the basis of an event specification that is contained within the policy itself. The event none command allows EEM to identify an EEM policy that can be manually triggered. To run the policy, use either the action policy command in applet configuration mode or the event manager run command in privileged EXEC mode.
Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/eem/configuration/xe-3s/eem-xe-3s-book/eem-policy-cli.html
NEW QUESTION # 159
Refer to the exhibit.
An engineer must block all traffic from a router to its directly connected subnet 209.165.200.0/24. The engineer applies access control list EGRESS in the outbound direction on the GigabitEthernet0/0 interface of the router However, the router can still ping hosts on the 209.165.200.0/24 subnet. Which explanation of this behavior is true?
- A. Access control lists that are applied outbound to a router interface do not affect traffic that is sourced from the router.
- B. After an access control list is applied to an interface, that interface must be shut and no shut for the access control list to take effect.
- C. Only standard access control lists can block traffic from a source IP address.
- D. The access control list must contain an explicit deny to block traffic from the router.
Answer: A
Explanation:
Access control lists that are applied outbound on a router interface do not affect traffic that is sourced from the router itself. This means even if an ACL is applied to block certain types of outgoing traffic, it won't block pings or other types of traffic originating from the router itself. References: Implementing and Operating Cisco Service Provider Network Core Technologies
NEW QUESTION # 160
Which data is properly formatted with JSON?
A)
B)
C)
D)
- A. Option D
- B. Option C
- C. Option A
- D. Option B
Answer: C
NEW QUESTION # 161
Refer to the exhibit.
Refer to the exhibit A network engineer must use a Python script lo convert data received from a network device. Which type of data is printed to the console when the script runs?
- A. tuple list
- B. dictionary with a key-value pair
- C. list of lists
- D. list of strings
Answer: B
NEW QUESTION # 162
Which two GRE features are configured to prevent fragmentation? (Choose two.)
- A. TCP window size
- B. MTU ignore
- C. IP MTU
- D. TCP MSS
- E. DF bit clear
Answer: D,E
NEW QUESTION # 163
Refer to the exhibit.
Which type of antenna do the radiation patterns present?
- A. Omnidirectional
- B. Dipole
- C. Patch
- D. Yagi
Answer: C
NEW QUESTION # 164
Refer to the exhibit. Which command is required on router R1 to start receiving RESTCONF requests?
- A. R1(config)# restconf
- B. R1(config)# ip http server
- C. R1(config)# ip http access-class 12
- D. R1(config)# ip http accounting commands 12 default
Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/ios-
xml/ios/prog/configuration/167/b_167_programmability_cg/restconf_programmable_interface.pdf
NEW QUESTION # 165
Refer to the exhibit. Object tracking has been configured for VRRP. Enabled routers Edge-01 and Edge-02. Which commands cause Edge-02 to preempt Edge-01 in the event that interface G0/0 goes down on Edge-01?
- A. Option D
- B. Option C
- C. Option A
- D. Option B
Answer: C
NEW QUESTION # 166
Refer to the exhibit.
An engineer must set up connectivity between a campus aggregation layer and a branch office access layer.
The engineer uses dynamic trunking protocol to establish this connection, however, management traffic on VLAN1 is not passing. Which action resolves the issue and allow communication for all configured VLANs?
- A. Disable Spanning Tree for the native VLAN.
- B. Allow all VLANs on the trunk links
- C. Configure the correct native VLAN on the remote interface
- D. Change both interfaces to access ports.
Answer: C
NEW QUESTION # 167
Drag and drop the virtual components from the left onto their deceptions on the right.
Answer:
Explanation:
NEW QUESTION # 168
Which method is used by an AP to join HA controllers and is configured in NVRAM?
- A. IP Helper Addresses
- B. Primary/Secondary/Tertiary/Backup
- C. DNS
- D. stored WLC information
Answer: D
NEW QUESTION # 169
Drag and drop the automation characteristics from the left onto the appropriate tools on the right. Not all options are used.
Answer:
Explanation:
Explanation:
NEW QUESTION # 170
Which action is the vSmart controller responsible for in a Cisco SO-WAN deployment?
- A. onboard WAN Edge nodes into the SD-WAN fabric
- B. manage, maintain, and gather configuration and status for nodes within me SD-WAN fabric
- C. distribute security information for tunnel establishment between WAN Edge routers
- D. gather telemetry data from WAN Edge routes
Answer: C
NEW QUESTION # 171
Which option must be used to support a WLC with an IPv6 management address and 100 Cisco Aironet 2800 Series access points that will use DHCP to register?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION # 172
A network administrator applies the following configuration to an IOS device.
What is the process of password checks when a login attempt is made to the device?
- A. A TACACS+server is checked first. If that check fail, a database is checked?
- B. A TACACS+server is checked first. If that check fail, a RADIUS server is checked. If that check fail. a local database is checked.
- C. A local database is checked first. If that fails, a TACACS+server is checked, if that check fails, a RADUIS server is checked.
- D. A local database is checked first. If that check fails, a TACACS+server is checked.
Answer: D
NEW QUESTION # 173
Refer to exhibit.
VLANs 50 and 60 exist on the trunk links between all switches All access ports on SW3 are configured for VLAN 50 and SW1 is the VTP server Which command ensures that SW3 receives frames only from VLAN
50?
- A. SW1 (config)#vtp mode transparent
- B. SW3(config)#vtp mode transparent
- C. SW2(config)#vtp pruning
- D. SW1 (config)#vtp pruning
Answer: D
NEW QUESTION # 174
Drag and drop the characteristics from the left onto the infrastructure types on the right.
Answer:
Explanation:
NEW QUESTION # 175
Drag and drop the description from the left onto the correct QoS components on the right.
Answer:
Explanation:
Explanation
Traffic Policing: Drops excessive Traffic, causes TCP retransmissions, introduce no delay/jitter Shaping: buffers, excessive traffic, introduce delay and jitter, typically delays, rather than drops traffic
NEW QUESTION # 176
Refer to the exhibit.
A network engineer must simplify the IPsec configuration by enabling IPsec over GRE using IPsec profiles.
Which two configuration changes accomplish this? (Choose two).
- A. Apply the crypto map to the tunnel interface and change the tunnel mode to tunnel mode ipsec ipv4.
- B. Create an IPsec profile, associate the transform-set ACL, and apply the profile to the tunnel interface.
- C. Remove all configuration related to crypto map from R1 and R2 and eliminate the ACL.
- D. Remove the crypto map and modify the ACL to allow traffic between 10.10.0.0/24 to 10.20.0.0/24.
- E. Create an IPsec profile, associate the transform-set, and apply the profile to the tunnel interface.
Answer: C,E
NEW QUESTION # 177
Refer to the exhibit.
These commands have been added to the configuration of a switch. Which command flags an error If It is added to this configuration?
- A. monitor session 1 source interface port-channel 7, port-channel 8
- B. monitor session 1 source vlan 10
- C. monitor session 1 source interface port-channel 6
- D. monitor session 1 source interface FastEthernet0/1 rx
Answer: B
Explanation:
Explanation
NEW QUESTION # 178
When using TLS for syslog, which configuration allows for secure and reliable transportation of messages to its default port?
- A. logging host 10.2.3.4 vrf mgmt transport udp port 514
- B. logging host 10.2.3.4 vrf mgmt transport tcp port 6514
- C. logging host 10.2.3.4 vrf mgmt transport udp port 6514
- D. logging host 10.2.3.4 vrf mgmt transport tcp port 514
Answer: B
Explanation:
Explanation
The TCP port 6514 has been allocated as the default port for syslog over Transport Layer Security (TLS).
Reference: https://tools.ietf.org/html/rfc5425
NEW QUESTION # 179
......
Cisco 350-401 ENCOR exam is a certification test that is designed to validate the skills and knowledge of IT professionals in implementing core enterprise network technologies. 350-401 exam is a part of the Cisco Certified Network Professional (CCNP) Enterprise certification program and is aimed at individuals who want to prove their expertise in designing, configuring, and managing enterprise networks.
350-401 Deluxe Study Guide with Online Test Engine: https://www.bootcamppdf.com/350-401_exam-dumps.html
350-401 Test Prep Training Practice Exam Questions Practice Tests: https://drive.google.com/open?id=1eUVXmDWdbDks7u6Fl3sYgEI4nL1qtpXZ