Unique Top-selling D-NWG-DS-00 Exams - New 2025 EMC Pratice Exam
Dell Networking Dumps D-NWG-DS-00 Exam for Full Questions - Exam Study Guide
NEW QUESTION # 32
What is the correct order of steps involved in OSPF troubleshooting?
Response:
- A. 1. Check if the devices are in the same area and area type.
- B. 1. Check if the devices are in the same area and area type.
- C. 1. Check if the devices are in the same area and area type.
- D. 1. Check if the devices are in the same area and area type.
Answer: D
NEW QUESTION # 33
What is the primary role of a networking design professional in an enterprise environment?
Response:
- A. To monitor daily network traffic
- B. To configure individual network devices
- C. To install network cables
- D. To architect and design a scalable, efficient, and secure network infrastructure
Answer: D
NEW QUESTION # 34
What is the purpose of using a Post-Deployment Verification template?
Response:
- A. To verify that the network configuration matches the design specifications
- B. To track and resolve network issues
- C. To assign VLANs to specific network devices
- D. To define the network's initial settings
Answer: A
NEW QUESTION # 35
A customer purchased the following:
- Two Dell PowerSwitch S5248-ON Top of Rack Switches
- One Dell PowerSwitch S3148-ON Management Switch
- One PowerStore 500T with 4x 25 GbE ports
Which three VLANs should be configured on the PowerSwitch S5248-ON Top of Rack switches?
Response:
- A. Internal Discovery
- B. Remote Discovery
- C. SDNAS
- D. PowerStore Storage
- E. PowerStore Management
Answer: C
NEW QUESTION # 36
What are two methods to configure FCoE?
Response:
- A. Use NPG when upstream is an FC switch.
- B. Use FSB mode when it connects to an upstream FCoE Switch.
- C. Configure the server port using DCB where FCoE connects.
- D. Perform zoning at the OS10 switch in NPG mode.
Answer: A,B
NEW QUESTION # 37
What is the primary function of the Troubleshooting Template in network documentation?
Response:
- A. It records and tracks network issues and their resolutions
- B. It verifies network configurations after deployment
- C. It manages software licensing for network devices
- D. It provides a detailed list of all VLANs and their configurations
Answer: A
NEW QUESTION # 38
An engineer is deploying and configuring an OS10 switch. They tried to resend the license to an internal email from the Digital Licensing and Fulfillment Portal. The subject line in received email shows the product name. There was no license that is attached to the email when the engineer opened the email. Why was the license not attached to the email that the engineer received?
Response:
- A. The license can only be sent to the email address it was registered to.
- B. The license should be sent from the DEE portal instead.
- C. The license must be bound to a service tag before sending the email.
- D. The account team must be involved to quote a new license first.
Answer: C
NEW QUESTION # 39
Which of the following are critical in planning for network segmentation using Layer 2 technologies?
Response:
- A. Fibre Channel zoning and thin provisioning
- B. Subnetting and routing protocols
- C. IP address allocation and subnetting
- D. VLAN segmentation and MAC address management
Answer: D
NEW QUESTION # 40
In which scenario would the FastList tool be most beneficial during the scoping phase of a network design project?
Response:
- A. When you need to estimate the cost of network hardware
- B. When you need to generate deployment scripts for network devices
- C. When you need to prioritize and organize project requirements for a new data center design
- D. When you need to calculate the environmental requirements of a network rack
Answer: C
NEW QUESTION # 41
In which phase of a network design project would the FastScript tool be most useful?
Response:
- A. Physical planning phase
- B. Pre-deployment checklist phase
- C. Documentation phase
- D. Deployment phase
Answer: D
NEW QUESTION # 42
Match the following roles in networking design with their corresponding responsibilities:
Role
Network Architect
Network Administrator
Security Engineer
Systems Engineer
Responsibility
A) Designs the entire network structure
B) Manages day-to-day network operations
C) Implements firewalls and intrusion detection
D) Manages servers and network services
Response:
- A. Network Architect - D
- B. Network Architect - C
- C. Network Architect - A
- D. Network Architect - A
Answer: D
NEW QUESTION # 43
Which of the following is NOT a typical role of a network design professional?
Response:
- A. Implementing firewalls and security policies
- B. Managing website content updates
- C. Designing a scalable network architecture
- D. Configuring individual network switches
Answer: B
NEW QUESTION # 44
The optical cables in a local area network are providing insufficient power. An engineer observes that the color of the cables is aqua. What cable did the engineer identify?
Response:
- A. Multimode 50 μm, laser optimized (OM3, OM4)
- B. Multimode 50 μm, laser optimized (OM4+)
- C. Multimode 50 μm and 62.5 μm (OM1, OM2)
- D. Single mode (OS1/OS2)
Answer: A
NEW QUESTION # 45
Which of the following should be considered during the planning phase of a Cyber Recovery Vault?
Response:
- A. Network switch redundancy
- B. Physical distance between production and recovery sites
- C. VLAN segmentation
- D. The use of thin provisioning
Answer: B
NEW QUESTION # 46
Which of the following are key elements in Layer 3 (L3) network planning?
Response:
- A. MAC address table management
- B. Routing protocols
- C. Subnetting
- D. IP addressing
Answer: B,C,D
NEW QUESTION # 47
A customer project requires additional scaling based on increased application and server workloads. What is recommended for the scaling?
Response:
- A. The VLTi links should be equal to or greater than the uplink bandwidth.
- B. Use a minimum of one port using the fastest switch port.
- C. Divide the total server count by two to determine the needed number of VLTi links.
Answer: A
NEW QUESTION # 48
What is the primary purpose of the FastScript tool in network design?
Response:
- A. To monitor network performance in real-time
- B. To create VLAN assignment tables
- C. To generate configuration scripts for network devices
- D. To automate the deployment of network devices
Answer: C
NEW QUESTION # 49
A network engineer is designing a leaf-spine architecture based on Dell PowerSwitches. Which three best practices should be considered in this scenario when implementing BGP?
Response:
- A. Use iBGP between the leaf and spine.
- B. Use one different ASN for each spine.
- C. Use one ASN per each leaf pair.
- D. Use the same ASN for each spine.
- E. Use eBGP between the leaf and spine.
Answer: B,C,E
NEW QUESTION # 50
What routing protocol is recommended when designing the leaf-spine network of a customer?
Response:
- A. BGP
- B. PTP
- C. IS-IS
- D. Static
Answer: A
NEW QUESTION # 51
......
Best way to practice test for EMC D-NWG-DS-00: https://www.bootcamppdf.com/D-NWG-DS-00_exam-dumps.html
D-NWG-DS-00 Dump Ready - Exam Questions and Answers: https://drive.google.com/open?id=143W8r7ssP8zSI6iD39K0JvQUypjim0qB