Practice on 2026 LATEST NS0-528 Exam Updated 278 Questions
Download Latest NS0-528 Dumps with Authentic Real Exam QA's
Network Appliance NS0-528 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
NEW QUESTION # 63
You have created a mirror-vault cascade relationship; however, the SnapMirror Snapshot copy does not exist on the vault destination. You must confirm that a SnapMirror label is configured for a mirror-vault cascade to transfer the SnapMirror Snapshot copy to the vault destination.
Which SnapMirror label must be confirmed in this scenario?
- A. weekly
- B. sm-created
- C. snapmirror
- D. daily
Answer: B
NEW QUESTION # 64
Which NetApp technology would you use to physically separate non-routable SnapMirror network traffic?
- A. broadcast domains
- B. lfgrps
- C. IPspaces
- D. cluster peer encryption
Answer: C
NEW QUESTION # 65
Which NetApp technology helps to protect against ransomware attacks?
- A. SyncMirror
- B. SnapLock
- C. NetApp Aggregate Encryption
- D. NetApp Volume Encryption
Answer: B
NEW QUESTION # 66
Your customer set up a SnapMirror synchronous relationship between two sites. They want to convert it to a SnapMirror active sync configuration for availability reasons.
What action must you take before you convert this relationship?
- A. Stop the destination SVM that is hosting the LUNs.
- B. Change the SnapMirror policy to Continuous.
- C. Unmap all LUNs on the destination volumes.
- D. Destroy all volumes in the destination SVM.
Answer: C
Explanation:
Before converting a SnapMirror Synchronous relationship to SnapMirror active sync, you must unmap all LUNs on the destination volumes. This is required to avoid access conflicts, as SnapMirror active sync introduces active-active multipath access and centralized coordination of LUN presentation.
NEW QUESTION # 67
You are asked to size an ONTAP disaster recovery and backup cluster. You are required to use 4 x 40 Gb Ethernet ports per controller and 4 x 32 Gb FC ports per controller. You also need to confirm support for Commvault IntelliSnap for NetApp v11.
In this scenario, which two tools would confirm these requirements? (Choose two.)
- A. Active IQ
- B. Interoperability Matrix Tool
- C. Hardware Universe
- D. OneCollect
Answer: B,C
NEW QUESTION # 68
You are tasked with planning a backup solution for a VMware environment running Windows VM. There is a requirement that production datastores must have ten days of local backups and a daily replication to a DR cluster site. The development datastores require only 7 days of local backups. There is also a requirement for a tool for the VMware administrators that enables them to monitor backups and perform restores.
What procedure can you use to meet the requirements?
- A. Install the NetApp SnapCenter Server from the GUI, create policies for production and development, and create resource groups for the production and development datastores.
- B. Deploy the NetApp SnapCenter Plug-In for Microsoft Windows from vCenter, create policies for production and development, and create resource groups for the production and development datastores.
- C. Deploy the NetApp SnapCenter Plug-In for VMware vSphere from vCenter, create policies for production and development, and create resource groups for the production and development datastores.
- D. In NetApp ONTAP System Manager, create Snapshot policies for production and development datastore volumes, and create a protection relationship for each production volume.
Answer: C
Explanation:
To meet the requirements of:
* Local backups for production (10 days) and development (7 days),
* Daily replication to a DR site for production, and
* Providing VMware administrators with backup and restore control,
you should use the SnapCenter Plug-In for VMware vSphere, which integrates directly with vCenter. It supports backup, restore, and monitoring of VMs and datastores, and allows policy and resource group configuration aligned with the specified retention and replication needs.
NEW QUESTION # 69
You must create and establish schedules for NetApp Snapshot copies and NetApp SnapMirror replication mirrors, and you need to manage them from a centralized location.
Which two products wouldsatisfy the requirements? (Choose two.)
- A. OnCommand System Manager
- B. Commvault IntelliSnap
- C. OnCommand Insight
- D. NetApp SnapCenter
Answer: A,D
NEW QUESTION # 70
What are two ways to determine if your SnapMirror relationships are up-to-date? (Choose two.)
- A. Use ONTAP System Manager and navigate to Protection -> Volume Relationships on the destination cluster.
- B. Use Active IQ and navigate to Cluster -> Volumes -> Protection.
- C. Use ONTAP System Manager and navigate to Protection -> Volume Relationships on the source cluster.
- D. Use Active IQ Unified Manager and navigate to Protection -> Volume Relationships.
Answer: A,B
NEW QUESTION # 71
Which NetApp solution safeguards Kubernetes volumes to object storage in public and private cloud providers?
- A. BlueXP backup and recovery
- B. BlueXP observability
- C. Astra Trident
- D. BlueXP classification
Answer: A
Explanation:
BlueXP backup and recovery provides protection for Kubernetes volumes by backing them up to object storage across public and private cloud providers. It ensures data durability, long-term retention, and recovery for containerized workloads.
NEW QUESTION # 72
You are asked to verify that data stored in your disaster recovery site can be restored and is viable. Currently, you have a NetApp SnapMirror relationship with a MirrorAllSnaps policy type that is enabled and is updating frequently.
What would be a nondisruptive method to carry out a detailed validation of your disaster-recovery strategy?
- A. Use SyncMirror on the destination aggregate on the destination cluster, and validate the data.
- B. Create a FlexClone volume of the destination volume on the destination cluster, and validate the data.
- C. Break the SnapMirrorrelationship and validate the data.
- D. Perform a SnapMirror reverse resynchronization to restore the data from the destination cluster to the source cluster, and validate the data.
Answer: D
NEW QUESTION # 73
You are performing a routine health check for a customer and need to determine if the disk shelf firmware is up to date.
From My AutoSupport, which report would you use?
- A. Transition Advisor
- B. Upgrade Advisor
- C. Event Viewer
- D. Visualization
Answer: D
NEW QUESTION # 74
You have set up SnapMirror relationships between two clusters. SnapMirror shows as unhealthy and fails with the following error:
Reason: 'Transfer failed'. Last Transfer Error Was 'The number of Snapshot copies on destination volume "volume_name" has reached the maximum supported count of <count_set_by_policy>.
When you check the EMS logs, you notice the following:
[NetAppProdVault-01: worker_thread_342: sm.xfer.fail.maxlim.snap:alert]: The number of Snapshot copies on destination volume 'SVM_filer02:vflsystems_sm_4' of the relationship with relationship UUID 'ala620fc-a870-lle9-94ef-00a09893ee91' and policy 'filer02_vault_daily_policy' has reached the maximum supported.
[NetAppProdVault-01: sm_logger_main: smc.snapmir.update.fail:error]: Snapmirror update from source volume 'vol1' to destination volume 'vol2' failed with error 'The number of Snapshot copies on destination volume "vol2" has reached the maximum supported count of <count_set_by_policy>.'. Relationship UUID 'ala620fc-a870-lle9-94ef-00a09893ee91'.
What is the cause of this situation, and how can you avoid this in the future? (Choose two.)
- A. The SnapMirror relationship has reached its maximum number of snapshots, which is 255.
- B. Modify the SnapMirror policy's -keep parameter.
- C. Modify the SnapMirror policy's -snapmirror-label parameter.
- D. The SnapMirror relationship has reached its maximum number of snapshots, which is 1019.
Answer: A,B
Explanation:
The SnapMirror destination volume has hit the maximum allowed number of Snapshot copies, which is typically 255 for most ONTAP systems. This causes transfers to fail with a "Snapshot copy limit reached" error.
To avoid this issue in the future:
* Adjust the -keep parameter in the SnapMirror policy to control how many Snapshot copies are retained.
* Implement a retention policy that matches your schedule and storage capacity.
NEW QUESTION # 75
Click the Exhibit button.
You have a SnapProtect v11 environment as shown in the exhibit.
What are the two default Snapshot copies created automatically after creating a Storage Policy. (Choose two.)
- A. Primary (Tape)
- B. primary (Snap)
- C. Primary (Classic)
- D. Primary (NetApp)
Answer: B,C
NEW QUESTION # 76
Exhibit:
You are asked to set up a SnapMirror relationship to protect some Oracle DB volumes on both nodes of the aff-01 and aff-02 clusters. You are using the 1 Gb network and the other nodes all have free space to support the mirror.
Referring to the exhibit, which two nodes would provide the least network transfer time for the relationship? (Choose two.)
- A. aff-02 to tme-ontap-prd-02
- B. aff-02 to ontap9-tme-8040-02
- C. aff-01 to tme-ontap-prd-01
- D. aff-02 to ontap9-tme-8040-01
Answer: A,B
NEW QUESTION # 77
What is the purpose of deduplication in NetApp ONTAP?
- A. To create backup copies of data
- B. To optimize data access speed
- C. To encrypt data for protection
- D. To reduce the amount of storage space required
Answer: D
NEW QUESTION # 78
You want to determine in real time how much capacity is available in your on-premises ONTAP 9.7 cluster.
Which two Web interfaces accomplish this task? (Choose two.)
- A. Active IQ
- B. ONTAP System Manager
- C. Active IQ Unified Manager
- D. Hardware Universe
Answer: B,C
NEW QUESTION # 79
A customer has just purchased a new 2-node AFF A220 cluster running ONTAP 9.7 and moved the older 4- node FAS2650 cluster running ONTAP 9.5 to an off-site location. They want to configure replication to the FAS2650 cluster for both disaster recovery and long-term archiving.
In this scenario, how would the customer accomplish this task?
- A. Upgrade the FAS2650 cluster to ONTAP 9.7, then configure SnapMirror with type TDP.
- B. Leave the ONTAP versions, then configure SnapMirror with type XDP.
- C. Downgrade the AFF A220 cluster to ONTAP 9.5, then configure SnapMirror with type XDP.
- D. Leave the ONTAP versions, then configure SnapMirror with type DP.
Answer: A
NEW QUESTION # 80
......
Authentic NS0-528 Exam Dumps PDF - Apr-2026 Updated: https://www.bootcamppdf.com/NS0-528_exam-dumps.html
NS0-528 Dumps Special Discount for limited time Try FOR FREE: https://drive.google.com/open?id=1ahjBvmx7cmou8ghTSZwHfLGytpyedtjH