Dec-2025 Pass Your FCSS_LED_AR-7.6 Exam at the First Try with 100% Real Exam
Get Real Exam Questions for FCSS_LED_AR-7.6 with New Questions
NEW QUESTION # 32
Which steps are required to configure RADIUS SSO (RSSO) on FortiAuthenticator?
(Choose three)
Response:
- A. Define RSSO attribute in FortiAuthenticator
- B. Configure FortiGate to use FortiAuthenticator as RADIUS server
- C. Enable RSSO in FortiGate security policy
- D. Enable RSSO group mapping
- E. Set FortiAuthenticator as LDAP proxy
Answer: A,B,D
NEW QUESTION # 33
Refer to the exhibit.
The FortiManager device is set to central management mode for FortiSwitch devices. How are configuration changes applied to multiple FortiSwitch devices? Response:
- A. Configuration changes require manually updating each device.
- B. Changes are made through a template.
- C. Configuration changes are made on individual switches.
- D. Changes are applied only to switches that share the same model number.
Answer: C
NEW QUESTION # 34
Which command verifies FortiExtender signal strength on a FortiGate CLI?
Response:
- A. get extender status
- B. show extender radio
- C. diagnose wireless-controller wlac
- D. diagnose extender modem status
Answer: D
NEW QUESTION # 35
How do you configure a FortiAuthenticator guest portal to expire credentials after 2 hours?
Response:
- A. set auth-expiry 120
- B. set expire-time 7200
- C. set ttl 120
- D. set guest-account-timeout 2h
Answer: A
NEW QUESTION # 36
To view FortiAP debug logs in the CLI, which command is used?
Response:
- A. diagnose wireless-controller wlac -c
- B. execute wireless ap debug start
- C. diagnose debug enable → diagnose debug application cw_ac -1
- D. debug controller-ap
Answer: C
NEW QUESTION # 37
In a FortiNAC deployment, what does the term "dissolvable agent" refer to?
Response:
- A. A cloud-based identity system
- B. An endpoint license
- C. A temporary agent downloaded for posture checks
- D. A configuration template
Answer: C
NEW QUESTION # 38
When integrating FortiAuthenticator with an LDAP server, which parameter must be correctly defined to perform user lookups?
Response:
- A. Group name
- B. DN (Distinguished Name)
- C. Syslog filter
- D. Shared secret
Answer: B
NEW QUESTION # 39
Which management mode is recommended for FortiAP when used in a large-scale enterprise with FortiManager?
Response:
- A. Cloud
- B. Local
- C. Bridge
- D. FortiCloud
Answer: B
NEW QUESTION # 40
What is the main benefit of VLAN pooling in wireless deployments?
Response:
- A. Forces clients to connect via MAC address
- B. Reduces DHCP exhaustion and improves load distribution
- C. Enables NAT between VLANs
- D. Disables rogue AP detection
Answer: B
NEW QUESTION # 41
Which three FortiAuthenticator configuration elements are involved in RSSO processing?
(Choose three)
Response:
- A. DNS Filter
- B. RSSO Attribute
- C. Syslog Server
- D. RADIUS Client
- E. Group Mapping
Answer: B,D,E
NEW QUESTION # 42
You are configuring a new wireless network for your organization. The network requires users to authenticate through a RADIUS server for secure access. Which two security modes should you select when creating the SSID to ensure compatibility with the RADIUS server?
(Choose two.)
Response:
- A. WPA-Personal
- B. WPA3-Enterprise
- C. WPA2-Enterprise
- D. WPA/WPA2 Mixed Mode
- E. WEP
Answer: B,D
NEW QUESTION # 43
Which CLI command enables FortiLink on port1 of a FortiGate for FortiSwitch management?
Response:
- A. config system interface
- B. All of the above
- C. edit port1
- D. set fortilink enable
Answer: B
NEW QUESTION # 44
What is the default RSSO attribute FortiAuthenticator uses to group users?
Response:
- A. Class
- B. Filter-ID
- C. CN
- D. Group-ID
Answer: B
NEW QUESTION # 45
Which field in a RADIUS accounting message is used by FortiAuthenticator for RSSO group assignment?
Response:
- A. User-Password
- B. NAS-Identifier
- C. Filter-ID
- D. Calling-Station-ID
Answer: C
NEW QUESTION # 46
Which authentication method is triggered when a device does not support 802.1X but needs to access the network using its MAC address?
Response:
- A. RADIUS EAP chaining
- B. MAC Authentication Bypass (MAB)
- C. EAP-TLS
- D. LDAP-based login
Answer: B
NEW QUESTION # 47
Which features can FortiManager centrally control on FortiAPs?
(Choose two)
Response:
- A. Radio profile
- B. IPsec tunnel creation
- C. Cellular modem routing
- D. SSID broadcast
Answer: A,D
NEW QUESTION # 48
Which policy components are essential in a FortiGate NAC policy for wireless networks?
(Choose three)
Response:
- A. Role assignment
- B. Posture check condition
- C. IPsec VPN enforcement
- D. Authentication rules
- E. VLAN assignment
Answer: A,D,E
NEW QUESTION # 49
Which of the following are required steps to configure FortiAuthenticator as a RADIUS server for user authentication?
(Choose two)
Response:
- A. Configure LDAP query in FortiGate
- B. Enable RSSO on the FortiGate
- C. Define RADIUS clients with shared secrets
- D. Create local user groups or remote user groups
Answer: C,D
NEW QUESTION # 50
Which log category must be selected to capture authentication logs in FortiAuthenticator's syslog settings?
Response:
- A. Authentication
- B. System Events
- C. Policy
- D. Debug
Answer: A
NEW QUESTION # 51
What is the default behavior of a factory-reset FortiGate with internet access and no configuration?
Response:
- A. It starts in transparent mode
- B. It requests a dynamic IP from DHCP
- C. It waits for manual config via console
- D. It self-registers to FortiManager via FortiDeploy
Answer: D
NEW QUESTION # 52
......
Updated FCSS_LED_AR-7.6 Certification Exam Sample Questions: https://www.bootcamppdf.com/FCSS_LED_AR-7.6_exam-dumps.html
Get Unlimited Access to FCSS_LED_AR-7.6 Certification Exam Cert Guide: https://drive.google.com/open?id=1eVvYvvLUYiA1UcU1lcRqenojHCJr2Qdx