Thirdly, we not only provide best Juniper JN0-364 Bootcamp pdf but also best gold service.
Before we provide you free JN0-364 demo download of bootcamp pdf for your reference. If you think it is available for your test you can purchase.
Then if you have any question about JN0-364 Bootcamp pdf before purchasing or after purchasing we will solve for you in time. Our working time is 7*24 on line, we handle every talk or email in two hours. If you have any query about Credit or downloading & using JN0-364 Bootcamp test engine we have special customer service to explain.
After purchasing we advise you to trust our JN0-364 Bootcamp pdf and just try your best to practice & mater all questions and answers you will pass exam surely. If you unfortunately fail the JN0-364 exam e provide you 100% money back guarantee. We are confident in our JN0-364 Bootcamp pdf.
Do you still have any doubt about our JN0-364 dumps pdf? Please kindly let us know, we will be pleased to accept any value comments and suggestions. Trust me once our Juniper JN0-364 Bootcamp pdf will assist you pass exams and get success!
Secondly, we guarantee all JN0-364 Bootcamp pdf are valid and accurate.
All our research experts are talent and experienced in editing study guide pdf more than ten years. These questions on JN0-364 Bootcamp pdf are selected by our professional expert team and are designed to not only test your knowledge and ensure your understanding about the technology about Juniper Service Provider Routing and Switching, Specialist (JNCIS-SP) but also mater the questions and answers similar with the real test. After editing the latest version of JN0-364 Bootcamp pdf our information department staff will upload the update version into the website in time. We assign specific person to check the updates and revise every day so that we guarantee all JN0-364 Bootcamp pdf we sell are valid and accurate. With our JN0-364 Bootcamp you will be sure to pass the exam and get the JNCIS-SP certification (JN0-364 - Service Provider Routing and Switching, Specialist (JNCIS-SP)).
The fastest and most effective way for candidates who are anxious about Juniper Service Provider Routing and Switching, Specialist (JNCIS-SP) is purchasing the valid and latest JN0-364 Bootcamp pdf. Based on past official data we all know that the regular pass rate for JN0-364 is very low. Many candidates test again and again since the test cost for Service Provider Routing and Switching, Specialist (JNCIS-SP) is expensive. They are under great pressure before passing the real test without JN0-364 Bootcamp pdf. It has a big impact on their jobs and lives. So for some candidates who are not confident for real tests or who have no enough to time to prepare I advise you that purchasing valid and latest Juniper JN0-364 Bootcamp pdf will make you half the efforts double the results.
Juniper JN0-364 braindumps Instant Download: Our system will send you the JN0-364 braindumps file you purchase in mailbox in a minute after payment. (If not received within 12 hours, please contact us. Note: don't forget to check your spam.)
You are ready to purchasing JN0-364 Bootcamp pdf but you are not sure which company you can trust, are you? OK, I will introduce our advantages below:
Firstly, BootcampPDF is the leading Juniper certification exam bootcamp pdf provider.
We are engaged in this area more than ten years. Our passing rate is really high especially for JuniperJN0-364. For so many years we keep our standout high-quality JN0-364 dumps pdf all the time and we are the best and always being imitated, never exceeding. Without any doubt our JN0-364 Bootcamp pdf steadily keeps valid and accurate. We are proud of our high passing rate and good reputation of JN0-364 Braindumps pdf.
Juniper JN0-364 Exam Syllabus Topics:
| Section | Weight | Objectives |
|---|---|---|
| Protocol-Independent Routing | 10-15% | - Load balancing - Static, aggregate, and generated routes - Filter-based forwarding - Routing instances and RIB groups - Martian addresses |
| Open Shortest Path First (OSPF) | 15-20% | - LSA types and operation - Link-state database - Areas and router types - Configuration and troubleshooting |
| Intermediate System to Intermediate System (IS-IS) | 10-15% | - PDUs and TLVs - Metrics and wide metrics - Configuration and monitoring - Adjacencies and levels |
| IPv6 | 8-12% | - OSPFv3 and BGP for IPv6 - Address types and format - Static and dynamic routing - Autoconfiguration |
| Border Gateway Protocol (BGP) | 20-25% | - Policy and route filtering - Basic operation and message types - Path selection and attributes - IBGP and EBGP - Configuration and troubleshooting |
| Tunnels | 5-8% | - Tunnel configuration and usage - GRE and IP-IP tunnels |
| Spanning Tree Protocols | 8-12% | - Configuration and convergence - BPDU and protection features - Port roles and states - STP, RSTP, MSTP, VSTP |
| Layer 2 Bridging and VLANs | 8-12% | - Service provider switching features - Bridging concepts - VLANs and trunking |
| Multiprotocol Label Switching (MPLS) | 12-18% | - Labels and LIB - LDP and RSVP - Segment routing basics - Terminology and forwarding - Configuration and monitoring |
| High Availability | 5-8% | - Nonstop active routing - NSR and GRES concepts - Graceful restart |
Juniper Service Provider Routing and Switching, Specialist (JNCIS-SP) Sample Questions:
1. You want to share routes between two routing instances that you have configured? What are two ways to accomplish this task? (Choose two.)
A) Use a non-forwarding instance.
B) Use a RIB group.
C) Configure an instance import policy
D) Create a forwarding instance.
2. Which two statements are correct about segment routing? (Choose two.)
A) Label assignments can be advertised through LDP updates.
B) There are no segment routing adjacencies to maintain.
C) Segment routing adjacencies require very little resources to maintain.
D) Label assignments can be advertised through OSPF updates.
3. Click the Exhibit button.
You have configured an MPLS LSP that begins on R1 and terminates on R5 using the Junos default settings.
Referring to the exhibit, which router will perform only label swap operations?
A) R5
B) R3
C) R1
D) R4
4. Click the Exhibit button. All devices in the network are configured correctly and the path requirements are valid. Referring to the exhibit, which two statements are correct? (Choose two.)
A) The primary LSP will not be signaled, and its state will be down.
B) The secondary LSP will not be signaled, and its state will be down.
C) The primary LSP will be signaled, and its state will be up.
D) The secondary LSP will be signaled, and its state will be up.
5. You are asked to configure the OSPF environment to prevent the DRother routers from participating in DR/BDR election.
Referring to the exhibit, which command will accomplish this task?
A) set protocols ospf area 0.0.0.0 interface ge-0/0/1 interface-type nbma
B) set protocols ospf area 0.0.0.0 interface ge--0/0/1 interface-type p2p
C) set protocols ospf area 0.0.0.0 interface ge-0/0/l priority 255
D) set protocols ospf area 0.0.0.0 interface ge-0/0/1 priority
Solutions:
| Question # 1 Answer: B,C | Question # 2 Answer: C,D | Question # 3 Answer: B | Question # 4 Answer: C,D | Question # 5 Answer: D |



